
Ask a Question About This Product
This offer ends in:
The ALDN2060E aluminium dunnage rack provides off-floor storage for ingredient containers, packaged goods, and equipment in commercial kitchens, cold stores, and dry storage areas. Manufactured from 6063-T5 aluminium, it measures 1524×580×203mm and weighs 4.35kg. It is operated by purchasing managers and kitchen staff requiring ventilated, corrosion-resistant storage platforms.
Commercial Application
This rack solves the operational requirement for elevated storage that maintains airflow around stored goods while keeping them off wet or contaminated floors. It integrates into walk-in refrigerators, dry goods storage rooms, and prep areas where hygiene regulations mandate off-ground product placement.
The unit remains in fixed position during service. Its 60-inch width accommodates full-size storage containers, bulk ingredient bins, and boxed goods. The open slat design allows drainage and air circulation, reducing moisture accumulation under refrigerated conditions.
Key Operational Advantages
- Constructed from 6063-T5 aluminium alloy with corrosion resistance in humid and cold environments
- Open slat top with 580mm depth provides ventilation under stored goods
- Weighs 4.35kg for manual repositioning by single operator
- 203mm clearance height meets commercial kitchen floor storage regulations
- Non-porous surface resists bacterial growth and cleans with standard sanitizing agents
- Supports loads of 35kg without structural deflection
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | ALDN2060E |
| Dough Capacity | 35 kg (77.2 lbs) |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 4.35 kg (9.6 lbs) |
Construction & Build Quality
The rack is fabricated from extruded 6063-T5 aluminium, chosen for its strength-to-weight ratio and resistance to corrosion in cold storage and high-humidity environments. Welded joints provide structural rigidity. The open slat surface is non-porous and resists chemical degradation from cleaning solutions.
- 6063-T5 aluminium extrusions with welded frame assembly
- Slat spacing optimized for container stability and drainage
- No paint or coating required — bare aluminium finish maintains hygiene standards
- Meets CE, NSF, and CSA material compliance for food contact environments
Suitable Operations
- Restaurants
- Hotels
- Catering businesses
- Food trucks
- Commercial kitchens
Procurement & Support
TurcoBazaar supplies this Zodex-manufactured dunnage rack from UK facilities with shipping available to Europe, North America, the Middle East, and Africa. Multiple units can be consolidated for freight efficiency. Lead time is confirmed at order placement based on destination and quantity.
Frequently Asked Questions
Q: Is this rack suitable for walk-in freezer use at -20°C?
A: Yes. 6063-T5 aluminium maintains structural integrity and corrosion resistance at temperatures from -40°C to +80°C. The material does not become brittle under commercial freezer conditions.
Q: What is the maximum load capacity for this dunnage rack?
A: The unit supports evenly distributed loads up to 35kg without deflection. Heavier concentrated loads should be assessed based on container footprint and placement.
Q: Does TurcoBazaar ship this rack to North America and the Middle East?
A: Yes. TurcoBazaar ships to the USA, Canada, UAE, Saudi Arabia, and other Middle Eastern territories. Freight cost depends on quantity and destination port.
Q: Are replacement parts available if slats become damaged?
A: Replacement slat sections and frame components are stocked by TurcoBazaar. Lead time for spare parts is 5-10 working days to most regions.
Q: How is this rack cleaned in a commercial kitchen environment?
A: The non-porous aluminium surface is cleaned with standard alkaline or quaternary ammonium sanitizers. The open slat design allows spray cleaning without disassembly.