

















Ask a Question About This Product
This offer ends in:
This single-bowl stainless steel sink measures 1000×600×900mm and is configured with the bowl positioned on the right side. The integrated 100mm splashback prevents water migration to wall surfaces during washing operations. CE-certified construction meets commercial kitchen hygiene standards across UK, EU, USA, and Canadian food service environments.
Commercial Application
The right-bowl configuration provides left-side workspace for prep or drainage during high-volume washing cycles. Pre-drilled faucet hole accepts standard commercial taps. Adjustable feet compensate for uneven floor surfaces in older commercial premises.
The 450×480×220mm bowl handles full-size sheet pans and large stockpots during service cleanup. Anti-runoff edge prevents water spillage onto floor during heavy-volume washing. Flat-pack delivery reduces freight cost for multi-unit installations.
Key Operational Advantages
- 1000mm width provides 520mm workspace left of bowl for drying or prep staging
- 13 kg weight allows two-person installation without mechanical lifting equipment
- 100mm splashback height prevents wall damage in high-splash washing operations
- Fully stainless steel construction eliminates galvanised rust points in wet environments
- Adjustable feet provide 50-80mm height variance for drainage gradient compliance
- Pre-drilled tap hole accepts standard 35mm commercial faucet fittings
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | SINK8060RIGHT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 13.0 kg (28.7 lbs) |
Construction & Build Quality
Full stainless steel body construction eliminates corrosion failure points common in galvanised-frame units. Pre-drilled faucet hole and anti-runoff edge are formed during pressing to eliminate weld joints. Bowl depth of 220mm handles large cookware without splash-over during scrubbing.
- Single-piece pressed bowl with radius corners for drainage and cleaning access
- 100mm rear splashback welded to deck surface with sealed joints
- Adjustable stainless steel feet with 50-80mm height range
- Anti-runoff edge formed on three open sides to contain water during use
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex sink unit to commercial kitchens across UK, Europe, USA, Canada, Middle East, and Africa. Flat-pack delivery reduces international freight cost. CE certification documentation ships with unit for local health authority inspections.
Frequently Asked Questions
Q: What grade of stainless steel is used in construction?
A: This unit uses commercial-grade stainless steel suitable for food contact surfaces under CE certification. Steel grade meets UK and EU food safety material standards. Zodex confirms compliance with NSF and CSA material requirements for North American installations.
Q: What is the maximum load capacity of the work surface?
A: The 520mm left-side work surface handles typical prep loads including cutting boards and small equipment up to 15 kg distributed load. The bowl supports full sheet pans and stockpots during washing. Adjustable feet must contact stable flooring for rated capacity.
Q: Can adjustable legs be replaced with fixed-height feet or shelving?
A: The unit ships with adjustable feet providing 50-80mm height variance. Fixed-height feet are not offered as standard. Undershelf options are not available on this right-bowl configuration due to bowl position and drainage requirements.
Q: Is the 100mm splashback height sufficient for wall protection?
A: The 100mm splashback prevents water migration during normal washing operations when positioned against finished wall surfaces. Higher splashback units are available if local health codes require 150mm or 200mm heights. Standard 100mm height meets most UK and EU commercial kitchen regulations.
Q: Can this unit be custom-sized or configured with bowl on left side?
A: This model is manufactured in fixed 1000×600×900mm dimensions with right-bowl configuration. Left-bowl variant available as separate SKU. Custom sizing requires minimum order quantities and extended lead times through Zodex manufacturing.