
Ask a Question About This Product
This offer ends in:
The JSN208 moves plated meals, clean serviceware, and prepared ingredients across commercial kitchen stations. It transports up to 20 kg of goods across three steel tiers in hotel kitchens, restaurant service areas, and catering production facilities. Kitchen porters and waiting staff operate it during service and between prep cycles.
Commercial Application
Service trolleys eliminate repeated single-item trips between kitchen zones and front-of-house areas. The three-tier layout separates clean plates from used serviceware or holds multiple course components during plated service. Four swivel castors allow one operator to move loaded trays through narrow aisles and around prep stations.
During service peaks, front-of-house staff load cleared plates on lower tiers while top shelves carry fresh plated dishes. In prep environments, it stages portioned ingredients near cooking stations or transports cleaned equipment back to storage. The 950 mm width accommodates standard gastronorm trays and stacked plate sets.
Key Operational Advantages
- Three 950×500 mm tiers provide 1.425 m² total load surface area
- SS201 stainless steel frame resists corrosion in wet commercial environments
- Swivel castors on all four corners enable tight-radius turning in confined aisles
- 13.5 kg unit weight allows single-operator repositioning when unloaded
- 20 kg maximum load capacity per trolley suits plated service and light equipment transport
- Square-tube frame construction maintains tier alignment under daily loading cycles
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | JSN208 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 13.5 kg (29.8 lbs) |
Construction & Build Quality
The frame uses SS201 stainless steel square tubing welded at corner joints. All three shelves are formed from single-piece stainless sheet with rounded edges. Four swivel castors mount directly to frame legs with bolt-through fixings.
- SS201 stainless steel throughout — frame, shelves, and fixings
- Square-tube frame provides torsional rigidity during loaded transport
- Single-piece shelf panels eliminate dirt-trap seams
- Swivel castors rated for commercial kitchen floor surfaces
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the JSN208 from UK warehouse stock to commercial buyers in the United Kingdom, Europe, United States, Canada, Middle East, and Africa. CE certification confirms compliance with UK and EU commercial kitchen hygiene standards. NSF and CSA equivalence applies for North American installations.
Frequently Asked Questions
Q: Is the frame 304 or 430 grade stainless steel?
A: The JSN208 uses SS201 stainless steel for frame and shelves. SS201 provides adequate corrosion resistance for dry and moderately wet indoor kitchen environments. It is not recommended for constant water exposure or outdoor use.
Q: What is the load capacity per shelf tier?
A: Maximum trolley load is 20 kg distributed across all three tiers. Concentrate heavy items on lower shelves to maintain stability. Uneven top-heavy loading increases tip risk during movement.
Q: Are the shelf heights adjustable?
A: Shelf positions are fixed at factory-set intervals. The three tiers are welded or permanently fastened to the frame. Custom tier spacing requires special order through the manufacturer.
Q: Can I add splash-back panels to the shelves?
A: The standard JSN208 has open-sided shelves without splash guards. Retrofit panels must be fabricated separately and attached with non-permanent fixings to avoid voiding warranty.
Q: Do you supply custom trolley dimensions for specific aisle widths?
A: Standard JSN208 dimensions are 950×500×950 mm. Custom sizing requires minimum order quantities and extended lead times. Contact TurcoBazaar with required dimensions for feasibility assessment and quotation.