Commercial Stainless Steel Work Table No Bottom shelf 1500x600x900mm | TurcoBazaar WT60150GNU

Commercial Stainless Steel Work Table No Bottom shelf 1500x600x900mm | TurcoBazaar WT60150GNU
Commercial Stainless Steel Work Table No Bottom shelf 1500x600x900mm | TurcoBazaar WT60150GNU
Commercial Stainless Steel Work Table No Bottom shelf 1500x600x900mm | TurcoBazaar WT60150GNU
Commercial Stainless Steel Work Table No Bottom shelf 1500x600x900mm | TurcoBazaar WT60150GNU
Commercial Stainless Steel Work Table No Bottom shelf 1500x600x900mm | TurcoBazaar WT60150GNU
This offer ends in:
Days
Hours
Min
Sec
from Save -64%
£112.80
£316.80
Ex Tax: £112.80
  • Brand: Zodex
  • Model: WT60150GNU
  • SKU: WT60150GNU
Sold: 0
Views: 1243
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The WT60150GNU is a 1500×600mm stainless steel work table with no lower shelf. It provides a raised food-contact surface at 900mm height for preparation, assembly, and plating tasks in commercial kitchens. Flat-packed delivery reduces freight cost on multi-unit orders.

Commercial Application

Work tables without lower shelves allow trolley access underneath during service. Operators use the surface for ingredient staging, prep work, or plating during high-volume periods. The absence of a bottom tier simplifies floor cleaning and meets open-leg hygiene protocols in inspected kitchens.

Kitchen managers position these tables in prep zones, pass sections, or alongside cooking lines. The 600mm depth accommodates GN containers, cutting boards, and small equipment without blocking aisle movement. Stainless construction tolerates repeated washdowns with commercial detergents.

Key Operational Advantages

  • 2mm 201 stainless steel top surface supports 250kg distributed load
  • Stainless steel legs and sockets withstand daily washdown cycles
  • Adjustable plastic bullet feet compensate for uneven floors
  • No lower shelf allows trolley storage or cleaning equipment access underneath
  • Flat-packed assembly reduces inbound freight cost on bulk orders
  • CE-certified construction meets UK, EU, USA (NSF), and Canada (CSA) hygiene standards

Technical Specifications

SpecificationDetails
Model / SKUWT60150GNU
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight20.0 kg (44.1 lbs)

Construction & Build Quality

The worktop is fabricated from 2mm 201-grade stainless steel with welded or folded edges. Legs and corner sockets are stainless steel tube. Adjustable bullet feet are food-safe plastic rated for commercial floor contact.

  • 2mm 201 stainless steel worktop — non-porous and corrosion-resistant
  • Stainless steel leg frames and socket joints — no galvanized components in contact zones
  • Adjustable plastic feet compensate up to 15mm floor variance
  • Flat-pack design ships in compact carton — assembly hardware included

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the WT60150GNU from UK inventory to commercial buyers in the UK, Europe, North America, the Middle East, and Africa. Zodex manufactures the unit in Turkey under ISO-certified production standards. Multi-unit orders qualify for consolidated freight quotation.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, multi-unit pricing, or freight quotation. WhatsApp and email support available for assembly questions and compliance documentation.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used in the worktop?

A: The worktop is 2mm 201-grade stainless steel. It meets food-contact standards for commercial kitchens in the UK, EU, and North America. Legs and sockets are also stainless steel construction.

Q: What is the maximum load capacity of the work surface?

A: The top surface supports a distributed load of 250kg when evenly placed. Concentrated point loads should not exceed 80kg in a single 300×300mm area. Uneven load distribution may cause deflection over time.

Q: Are the legs adjustable for uneven floors?

A: Plastic bullet feet at each leg corner adjust up to 15mm vertically. This compensates for minor floor slope or tile irregularities. Larger variances require floor leveling or shims.

Q: Can a splashback or upstand be added later?

A: The WT60150GNU ships without a rear upstand. Retrofit splashbacks are not available as standard. Custom fabrication or wall-mounted splash guards can be sourced separately.

Q: Is custom sizing available for different kitchen layouts?

A: Custom widths, depths, and heights are produced on request with minimum order quantities. Lead time for bespoke dimensions is 4–6 weeks from Turkey. Contact TurcoBazaar for specification and pricing.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.