







Ask a Question About This Product
- Stock: In Stock
- Model: VWS1841
- SKU: VWS1841
The VWS1841 is a single-level wall-mounted shelf measuring 1800×400mm, fabricated from 304 AISI stainless steel. It stores utensils, containers, and prepared ingredients above work surfaces in commercial kitchens. Height-adjustable brackets accommodate uneven walls and variable service heights.
Commercial Application
Wall shelving moves inventory off counters and floor storage. This configuration reduces cross-contamination risk and increases accessible prep surface area. Rails and consoles mount directly to wall studs or concrete block.
Operators position frequently-used items at arm's reach during service. A single 1800mm span covers most prep station widths without additional centre support. The 400mm depth handles standard gastronorm pans and polycarbonate storage bins.
Key Operational Advantages
- 304 AISI stainless steel — non-porous, corrosion-resistant, food-contact approved
- 1800×400mm single shelf — spans standard prep station width
- Height-adjustable wall brackets — compensates for uneven surfaces, variable mounting heights
- Scotch Brite finish — minimises visible scratches, maintains hygienic cleanability
- 9 kg total weight — manageable two-person installation without specialised lifting equipment
- Supplied with rails and consoles — complete mounting hardware included
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VWS1841 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 9.0 kg (19.8 lbs) |
Construction & Build Quality
304 AISI stainless steel shelf and brackets provide food-grade surface and structural rigidity. Scotch Brite finish resists surface staining and scratching under commercial use. All fixings are stainless steel to prevent galvanic corrosion in wash-down environments.
- 304 AISI stainless steel throughout — shelf, brackets, and hardware
- Scotch Brite surface finish — non-directional grain for consistent appearance
- Welded bracket assemblies — no exposed fasteners on visible surfaces
- Supplied disassembled — reduces freight volume, simplifies doorway access
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies commercial stainless steel fabrications from UK stock to operators in the United Kingdom, Europe, United States, Canada, Middle East, and Africa. Freight quotations account for shelf dimensions and destination postcode. Standard carriage applies to UK mainland; international shipments require dimensional weight calculation.
Frequently Asked Questions
Q: Is this 304 or 430 grade stainless steel?
A: The VWS1841 is fabricated from 304 AISI stainless steel. This grade offers superior corrosion resistance in commercial kitchen wash-down and acidic food contact environments compared to 430 series.
Q: What is the maximum load capacity per shelf?
A: Load capacity depends on wall substrate and bracket spacing. Standard installation into masonry or metal studs at 600mm centres supports approximately 40kg evenly distributed. Consult a structural engineer for plasterboard or lightweight partition mounting.
Q: Can the shelf height be adjusted after installation?
A: Yes. The wall brackets feature slotted mounting holes allowing vertical repositioning in 25mm increments. Loosen bracket fixings, adjust height, re-torque fasteners to manufacturer specification.
Q: Is a splashback available for this model?
A: No integral splashback is included with the VWS1841. A separate wall-mounted splashback panel can be specified and installed independently. Contact TurcoBazaar for compatible splashback dimensions and mounting details.
Q: Can this shelf be manufactured in custom lengths?
A: Standard length is 1800mm as catalogued. Custom widths between 1000mm and 2400mm can be fabricated to order with extended lead times. Minimum order quantities and tooling charges apply for non-standard dimensions.