



Ask a Question About This Product
This offer ends in:
Three-bowl stainless steel sink unit with integrated cupboard and rear splashback for commercial wash stations. Measures 1500x600x850mm. Used in restaurant kitchens, hotel prep areas, and catering production facilities where hygiene compliance and multi-stage washing are required.
Commercial Application
Supports three-stage wash, rinse, sanitise protocol required under food safety regulations. Sliding door cupboard stores cleaning chemicals and utensils at point of use. Rear splashback prevents wall contamination during high-volume washing operations.
Handles pot wash, vegetable prep cleaning, and utensil sanitation during service. Triple bowl configuration allows simultaneous processing of different wash stages. 1500mm width accommodates large pans and hotel-size cookware.
Key Operational Advantages
- Triple bowl layout supports HACCP-compliant three-stage washing protocol
- 1500x600mm footprint fits standard commercial kitchen planning grids
- Sliding door cupboard provides 1400mm-width storage beneath sink basins
- Rear splashback extends upward from work surface to protect wall surfaces
- Stainless steel construction meets CE, NSF, and CSA commercial food contact standards
- 37.2 kg unit weight allows two-person installation without lifting equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH1010 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 37.2 kg (82.0 lbs) |
Construction & Build Quality
Constructed from food-grade stainless steel throughout. Sliding doors operate on commercial-grade track system. Rear splashback welded to main body to eliminate gaps where debris accumulates.
- Stainless steel basins formed from single-piece material with radiused corners
- Cabinet frame reinforced at load-bearing points for long-term stability
- Sliding door mechanism rated for 10,000+ cycles in wet environments
- Flat-pack design reduces freight volume while maintaining structural integrity after assembly
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sink units from UK distribution to buyers in Europe, North America, Middle East, and Africa. Standard lead time 5-7 working days for UK delivery. International freight quoted per destination and quantity.
Frequently Asked Questions
Q: What grade of stainless steel is used in the QNH1010 sink unit?
A: Unit constructed from 304-grade stainless steel. This grade provides corrosion resistance required in wet commercial environments. Material meets food contact standards for UK, EU, USA, and Canadian jurisdictions.
Q: What is the load-bearing capacity of the cupboard section?
A: Cabinet section supports 40 kg evenly distributed across base shelf. Load capacity sufficient for chemical containers, cleaning equipment, and spare utensils. Exceeding rated load may compromise sliding door operation.
Q: Are the legs adjustable for uneven floor surfaces?
A: Legs adjust within 20mm range to compensate for floor irregularities. Adjustment maintains level work surface required for proper drainage. Locking mechanism prevents drift during daily use.
Q: What is the height of the rear splashback?
A: Splashback extends 150mm above main work surface. Height sufficient to prevent wall contamination during standard washing operations. Does not interfere with wall-mounted shelving or equipment.
Q: Can dimensions be customised for specific kitchen layouts?
A: Standard model ships as 1500x600x850mm unit. Custom sizing available for orders above 10 units with 4-6 week lead time. Contact for quotation on non-standard dimensions or bowl configuration.