
Ask a Question About This Product
This offer ends in:
The THWSR207 is a 2-metre-wide heated cupboard that holds pre-plated meals and service-ready tableware at controlled temperatures between 30°C and 90°C. It operates via a 2000W heating fan in canteens, banquet kitchens, and large-scale catering facilities. The unit arrives fully assembled and weighs 175 kg.
Commercial Application
This cabinet sits in service holding lines where staff load plated meals or stacked crockery before service rushes. The sliding door configuration allows simultaneous loading and unloading without blocking workflow in tight prep corridors. Temperature is set according to plate material and hold time required by food safety protocols.
During banquet service or buffet operations, the 2-metre width accommodates multiple GN pan stacks or up to 200 plated covers depending on arrangement. The heating fan maintains even temperature distribution across the full interior volume. Adjustable feet compensate for uneven floor surfaces in legacy kitchen spaces.
Key Operational Advantages
- 2000W heating fan maintains +30°C to +90°C range across 2000 x 700 x 850mm interior
- Sliding door design reduces clearance requirements in galley-style prep lines
- Reinforced work surface provides additional staging area for tray assembly
- 175 kg weight indicates commercial-grade steel chassis construction
- Arrives fully assembled — no on-site assembly required
- Adjustable feet provide stability on tiled or poured concrete floors
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THWSR207 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 175.0 kg (385.8 lbs) |
Construction & Build Quality
The cabinet uses stainless steel for all food-zone surfaces and sliding door tracks. The reinforced top surface supports staging trays and service equipment during peak periods. Internal heating fan assembly circulates air to eliminate cold spots in fully loaded configurations.
- Stainless steel body and door panels
- Reinforced top surface rated for tray staging
- Internal fan-forced heating element
- Adjustable feet with commercial-grade levelling range
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the THWSR207 from UK warehouse stock to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. The unit ships fully assembled on pallet freight. Import documentation and voltage compatibility guidance provided for non-UK destinations.
Frequently Asked Questions
Q: What grade of stainless steel is used in the cabinet construction?
A: Food-contact surfaces use grade 304 stainless steel. External panels and structural components use grade 430 where food contact does not occur. Both grades meet CE hygiene certification requirements for commercial heated holding equipment.
Q: What is the maximum load capacity for the reinforced top surface?
A: The top surface supports up to 80 kg distributed load when used as a staging area. This accommodates stacked service trays or plated dish assembly during peak service. Concentrated point loads should not exceed 25 kg per contact area.
Q: Can internal shelving be added or adjusted for different pan configurations?
A: The THWSR207 ships without internal shelving to allow custom GN pan rack insertion based on operational needs. Standard GN rail kits can be retrofitted using the pre-drilled mounting holes on interior side walls.
Q: Is a splash-back available for wall-mounted installations?
A: A 150mm stainless steel splash-back can be ordered as an optional accessory for units positioned against tiled walls. The splash-back attaches to the rear edge of the top surface using countersunk fixings.
Q: Can the cabinet be manufactured in custom widths for specific kitchen layouts?
A: Zodex offers custom widths in 200mm increments between 1200mm and 2400mm with 8-week lead time. Custom orders require full specification confirmation and 50% deposit before fabrication begins.