Oven Chip Tray Stainless steel GN1/1 530x325x40mm | FFT11A

Oven Chip Tray Stainless steel GN1/1 530x325x40mm |  FFT11A
Oven Chip Tray Stainless steel GN1/1 530x325x40mm |  FFT11A
Oven Chip Tray Stainless steel GN1/1 530x325x40mm |  FFT11A
Oven Chip Tray Stainless steel GN1/1 530x325x40mm |  FFT11A
Oven Chip Tray Stainless steel GN1/1 530x325x40mm | FFT11A
This offer ends in:
Days
Hours
Min
Sec
from Save -35%
£28.80
£44.40
Ex Tax: £28.80
  • Stock: In Stock
  • Model: FFT11A
Sold: 0
Views: 1368
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The FFT11A is a perforated stainless steel tray designed for oven-based cooking of chips, goujons, wedges, and other pre-fried products. Measures 530×325×40mm to GN1/1 standard. Used in commercial kitchens where batch frying or oven finishing is required without additional oil.

Commercial Application

This tray sits inside convection ovens or combi steamers during high-volume service. The perforated base allows hot air circulation and fat drainage. Operators load frozen or par-cooked portions, then recover crisp product without stovetop frying.

During peak service, multiple trays stack or rotate through ovens for continuous output. The GN1/1 footprint fits standard gastronorm racking systems. Drainage holes eliminate grease pooling and reduce cook times.

Key Operational Advantages

  • GN1/1 dimensions (530×325×40mm) fit standard European gastronorm racks
  • Perforated base allows air circulation and fat drainage during cooking
  • Stainless steel construction withstands repeated oven cycles above 200°C
  • 0.75 kg weight enables single-handed loading and unloading
  • No additional oil required for oven finishing of frozen products
  • Flat-stack design for compact storage between service periods

Technical Specifications

SpecificationDetails
Model / SKUFFT11A
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight0.75 kg (1.7 lbs)

Construction & Build Quality

Constructed from food-grade stainless steel with uniform perforation pattern. The 40mm raised edge contains product during handling. Welded corners provide structural rigidity under thermal cycling.

  • Food-grade stainless steel body with perforated base
  • 40mm depth retains product during oven handling
  • Welded corner joints for thermal cycle durability
  • 0.75 kg unit weight for operator ergonomics

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the FFT11A from UK stock to commercial buyers worldwide. Standard dispatch covers the UK, Europe, USA, Canada, Middle East, and Africa. Freight consolidation available for multi-unit orders.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for material grade certification or bulk order pricing. WhatsApp available for rapid technical queries and freight scheduling.
Contact Our Team

Frequently Asked Questions

Q: What steel grade is the FFT11A constructed from?

A: Food-grade stainless steel, typically 304 or 430 series. Material certification available on request for hygiene compliance audits.

Q: What is the maximum load capacity for this tray?

A: Designed for up to 3 kg of frozen chips or similar products per cycle. Perforation pattern maintains structural integrity under typical batch loads.

Q: Does this tray fit standard gastronorm racking?

A: Yes. GN1/1 dimensions (530×325mm) fit European gastronorm shelving, trolleys, and oven racks. 40mm depth is suitable for most combi oven inserts.

Q: Can the FFT11A be used in convection ovens above 200°C?

A: Yes. Stainless steel construction withstands continuous operation at commercial oven temperatures. Thermal cycling does not degrade perforation integrity.

Q: Is this tray suitable for commercial dishwasher cleaning?

A: Yes. Stainless steel construction and perforated design allow complete chemical and rinse penetration. Flat-stack storage after drying.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.