







Ask a Question About This Product
- Stock: In Stock
- Model: WHWS123618
- SKU: WHWS123618
This wall-mounted stainless steel shelf provides 900mm x 300mm of overhead storage in commercial kitchens. It holds up to 50kg of cookware, containers, and utensils at 250mm above worktop height. Kitchen managers install it where floor space is limited and hygiene compliance requires non-porous surfaces.
Commercial Application
Wall shelving removes storage from floor level and prevents contamination transfer. Overhead positioning keeps frequently used equipment accessible during service without occupying prep surfaces. The 300mm depth accommodates standard gastronorm containers and stacked cookware.
Operators use this shelf above prep stations, cooking ranges, and dishwashing areas. The 50kg load capacity handles multiple stacked pots or bulk dry goods storage. Direct wall fastening eliminates brackets that collect grease and food debris.
Key Operational Advantages
- Holds 50kg distributed load across 900mm span
- Stainless steel construction resists corrosion in wet environments
- 300mm depth fits standard 1/1 gastronorm containers
- 250mm height clearance allows access without obstruction
- Wall-fastened design eliminates floor contact and simplifies cleaning
- Welded joints prevent bacterial harbourage points
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WHWS123618 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 3.0 kg (6.6 lbs) |
Construction & Build Quality
The shelf uses stainless steel sheet and frame construction with welded corner joints. All surfaces are non-porous and food-contact safe. Wall fasteners penetrate studs or masonry to distribute the 50kg load rating.
- Stainless steel sheet and frame throughout
- Welded joints at all connection points
- Food-contact grade surface finish
- Direct wall-mount fastening system included
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this shelf from UK stock to commercial buyers across Europe, North America, the Middle East, and Africa. We ship single units or bulk orders for multi-site kitchen fit-outs. The unit weighs 3kg and ships via standard freight carriers.
Frequently Asked Questions
Q: What grade of stainless steel is used in this shelf?
A: The shelf uses food-grade stainless steel suitable for commercial kitchen environments. Specific grade (304 or 430) depends on production batch. Contact us to confirm grade specification for your current order.
Q: How is the 50kg load capacity distributed?
A: The 50kg rating assumes evenly distributed load across the full 900mm width. Concentrated point loads reduce safe capacity. Wall mounting into solid masonry or studs is required to achieve full rating.
Q: Can the shelf height be adjusted after installation?
A: No. The shelf mounts at a fixed 250mm projection from the wall. Repositioning requires new wall fastener holes.
Q: Is a splash-back included with this model?
A: No. This model is an open shelf without rear panel. Contact us for splash-back options if required for your installation.
Q: Are custom dimensions available for longer runs?
A: Yes. We supply wall shelving in lengths from 600mm to 2000mm and depths from 250mm to 400mm. Minimum order quantities apply to non-standard sizes.