















Ask a Question About This Product
This offer ends in:
The DSA140701DR is a 1400mm single-bowl stainless steel sink with integral drawer and 100mm splashback. It weighs 40 kg and includes adjustable feet (850-865mm working height), ball-bearing drawer slides, and a bottom shelf. Used in commercial kitchens, hotel prep areas, and catering facilities for washing, rinsing, and food contact preparation.
Commercial Application
The unit fits into wash stations where utensils, cookware, and prep containers require cleaning before or after service. The single bowl sits to the right, leaving a 950mm workspace on the left for draining or temporary staging. The drawer stores scrubbers, gloves, or small cleaning supplies within arm's reach.
The 450x450x250mm bowl handles pots up to 12 litres. The bottom shelf stores stacked trays or backup detergent. The 100mm splashback prevents water running onto rear walls during high-volume washing shifts.
Key Operational Advantages
- 1400x700mm footprint with 450mm deep bowl and 250mm internal depth
- Adjustable height: 850-865mm via screw feet, plus 100mm splashback
- One ball-bearing drawer for cleaning supplies or utensils
- Bottom shelf supports up to 15 kg distributed load
- Includes GN1/1 container (530x325mm) for soaking or transport
- 40 kg assembled weight; disassembled for freight efficiency
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DSA140701DR |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 40.0 kg (88.2 lbs) |
Construction & Build Quality
All contact surfaces are stainless steel with drawn bowl construction (no welded seams in the basin). Legs are square-profile stainless steel with no galvanised coatings. The apron is reinforced to prevent flexing under load.
- Drawn bowl: single-piece pressing, no internal welds
- Reinforced apron below worktop prevents sagging
- Square stainless steel legs with adjustable plastic feet
- Ball-bearing drawer slides rated for 10,000+ cycles
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks from the UK to buyers in Europe, North America, the Middle East, and Africa. The DSA140701DR ships disassembled in a single carton to reduce freight cost. Assembly requires basic tools and takes approximately 45 minutes.
Frequently Asked Questions
Q: Is the DSA140701DR made from 304 or 430 stainless steel?
A: The sink uses 430-grade stainless steel for structure and worktop. This grade is magnetic, corrosion-resistant in dry and wet environments, and compliant with commercial kitchen hygiene standards.
Q: What is the load-bearing capacity of the worktop and bottom shelf?
A: The worktop supports up to 50 kg distributed evenly. The bottom shelf is rated for 15 kg when the load is spread across the full depth. Point loads (single heavy items) should not exceed 10 kg.
Q: Are the legs adjustable for uneven floors?
A: Yes. Each corner has a screw-adjust foot providing 15mm of height adjustment (850-865mm). Adjust all four feet to level the unit on sloped or uneven surfaces.
Q: Does the 100mm splashback come pre-attached?
A: The splashback is supplied separately and bolts to the rear edge during assembly. Pre-drilled holes align with the rear apron. Four stainless steel bolts are included.
Q: Can TurcoBazaar supply the unit in custom dimensions?
A: Custom sizing requires factory lead time of 6-8 weeks and a minimum order quantity. Contact TurcoBazaar with required dimensions (length, bowl position, number of bowls) for a quotation.