





Ask a Question About This Product
This offer ends in:
The VS186RBT is a commercial two-bowl sink unit with integrated bottom shelf and splashback. Built at 1800mm width and 600mm depth, it handles dual-stream washing and rinsing in medium to high-volume kitchens. Operators use it for continuous prep-ware washing, utensil cleaning, and vegetable preparation in hotels, restaurants, and catering facilities.
Commercial Application
Two 500mm x 400mm bowls allow separation of wash and rinse cycles without cross-contamination. The right-hand bowl configuration suits workflows where clean items move toward service or storage areas. Bottom shelf stores detergents, brushes, or sanitising equipment at point of use.
During service, the unit supports rapid turnover of prep tools and small equipment. Each bowl holds 250mm depth, accommodating stock pots, mixing bowls, and gastronorm containers. The 1800mm length provides draining space on either side of the bowls.
Key Operational Advantages
- Two 500mm x 400mm x 250mm deep bowls handle simultaneous wash and rinse operations
- 304 AISI stainless steel worktop, legs, and shelf — no galvanised components
- 40mm x 40mm square leg frame with adjustable feet for uneven floor compensation
- Integrated splashback prevents wall saturation during high-pressure spray washing
- Bottom shelf rated for chemical storage and heavy cleaning equipment
- 51kg unit weight provides stable platform during manual scrubbing operations
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VS186RBT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 51.0 kg (112.4 lbs) |
Construction & Build Quality
All wetted and structural surfaces are 304 AISI stainless steel with Scotch Brite finish. The 40mm square leg frame eliminates flex under load. Upturned worktop edges contain spills and prevent drips onto floor surfaces.
- 304 AISI stainless steel worktop, bowls, legs, shelf, and splashback
- Scotch Brite finish meets hygiene inspection standards for non-porous surfaces
- Adjustable feet compensate for floor gradients up to 15mm
- Under-panel between legs prevents debris accumulation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sinks to the UK, Europe, USA, Canada, Middle East, and Africa. The VS186RBT ships disassembled for freight efficiency. Assembly requires two operators and basic hand tools.
Frequently Asked Questions
Q: What grade of stainless steel is used in the VS186RBT?
A: All wetted and structural components are 304 AISI stainless steel. Worktop, bowls, legs, shelf, and splashback are 304 grade. No galvanised or 430 grade steel is used in this model.
Q: What is the load capacity of the bottom shelf?
A: The bottom shelf supports up to 30kg of distributed load. Suitable for detergent containers, cleaning equipment, and spare utensil storage. Avoid concentrated point loads exceeding 10kg.
Q: Are the legs adjustable for uneven floors?
A: The unit has four adjustable feet with 15mm vertical travel. Each foot locks with a threaded collar. Sufficient for most kitchen floor gradients and drainage slopes.
Q: Can the splashback be removed or is it welded?
A: The splashback is a fixed component of the frame assembly. It ships as part of the main structure and cannot be removed without compromising unit integrity.
Q: Is custom sizing available for different width requirements?
A: Standard widths are 1200mm, 1400mm, 1600mm, 1800mm, and 2000mm. Custom sizes require factory lead time and minimum order quantities. Contact TurcoBazaar for non-standard dimension feasibility.