















Ask a Question About This Product
This offer ends in:
The DSA150601DR is a single-bowl stainless steel sink unit with integrated drawer storage, bottom shelf, and 100mm splashback. Measures 1500x600x850mm with adjustable feet for uneven floors. Used in commercial kitchens for prep station wash-up, utensil cleaning, and vegetable processing.
Commercial Application
Installed at prep stations where operators require bowl access on one side and countertop workspace on the other. The right-positioned bowl layout allows left-hand workspace for chopping or plating while maintaining wash access. The drawer stores hand tools, thermometers, or cleaning supplies within arm's reach.
The 400x400x250mm bowl handles mixing bowls, stock pots, and standard prep trays. The bottom shelf holds bulk detergent, sanitiser bottles, or clean towel stacks. The 100mm splashback prevents water migration to wall surfaces during high-volume washing.
Key Operational Advantages
- Single 400x400x250mm bowl positioned right with 1500mm total length
- One drawer with ball-bearing slides rated for commercial use
- Bottom shelf and 100mm rear splashback included as standard
- Height adjusts 850-865mm via threaded feet for floor levelling
- 38kg flat-pack unit ships as knockdown assembly
- CE certified for UK and EU commercial kitchen hygiene compliance
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | DSA150601DR |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 38.0 kg (83.8 lbs) |
Construction & Build Quality
Constructed entirely from stainless steel with no galvanised components. Bowl and worktop are single-piece pressings with anti-runoff edges. The drawer uses ball-bearing slides for sustained opening cycles under wet conditions.
- Full stainless steel frame and panels
- Welded bowl construction with 3.5-inch drain opening
- Adjustable threaded feet resist corrosion in wet environments
- 32mm faucet hole pre-drilled for tap installation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the DSA150601DR from UK stock with worldwide freight to Europe, USA, Canada, Middle East, and Africa. Ships flat-pack with assembly instructions. Faucets and spray units available separately.
Frequently Asked Questions
Q: What grade of stainless steel is used in the DSA150601DR?
A: The unit uses food-grade stainless steel throughout. No galvanised steel is present in frame, bowl, or shelving. Finish is designed for commercial kitchen cleaning chemical contact.
Q: What is the load capacity of the bottom shelf?
A: The shelf is rated for typical commercial kitchen loading of cleaning supplies, stock containers, or towel stacks. Avoid concentrated point loads exceeding 30kg. Distribute weight evenly across the shelf surface.
Q: Are the feet and shelf height adjustable?
A: Feet adjust from 850mm to 865mm via threaded levellers. The bottom shelf is fixed-position. Height adjustment compensates for uneven floor surfaces and allows cleaning access underneath.
Q: Is the 100mm splashback removable or fixed?
A: The splashback is fixed and ships as part of the flat-pack assembly. It prevents water spray from reaching wall surfaces during washing. Not suitable for removal without structural alteration.
Q: Can the unit be ordered with custom bowl positioning or dimensions?
A: The DSA150601DR is a standard production model with right-positioned bowl. Custom sizing or left-bowl configuration requires factory enquiry. Minimum order quantities apply for non-standard configurations.