
Ask a Question About This Product
This offer ends in:
The VSC146BT is a dual-bowl stainless steel sink unit with integrated cupboard storage and raised splashback. Measures 1400×600×950mm and weighs 50kg. Used in commercial kitchens for pot washing, vegetable prep, and utensil cleaning where enclosed storage is required beneath the work surface.
Commercial Application
Installed in wash-up zones where floor-level storage reduces trips to dry stores. The cupboard houses cleaning chemicals, spare drain traps, and backup utensils within arm's reach of the bowls. Splashback protects wall finishes during high-volume washing shifts.
Two 500×400×250mm bowls allow simultaneous soaking and rinsing operations. One bowl holds detergent solution while the second provides clean rinse water. 1400mm width fits standard commercial kitchen planning grids and accommodates large stockpots and mixing bowls.
Key Operational Advantages
- Dual 500×400×250mm bowls handle separate wash and rinse operations
- 1400×600mm footprint with 950mm working height
- Enclosed cupboard storage beneath bowls for cleaning supplies and tools
- Raised splashback prevents water damage to wall surfaces
- 40×40mm square legs with adjustable feet compensate for uneven floors
- 50kg unit weight provides stability during heavy washing tasks
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VSC146BT |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 50.0 kg (110.2 lbs) |
Construction & Build Quality
Top and bowls fabricated from SS201 stainless steel with 1.0mm gauge worktop. Legs are 40×40mm square tube construction. Under-panel at 0.8mm thickness reinforces cupboard structure. Adjustable feet allow leveling on floors with 10–15mm variance.
- SS201 stainless steel body and bowls
- 1.0mm top gauge, 0.8mm under-panel reinforcement
- 40×40mm square stainless steel legs with adjustable feet
- Welded seams at bowl junctions and splashback edge
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial sink units to the UK, Europe, USA, Canada, Middle East, and Africa. The VSC146BT ships as a single 50kg crated unit. CE certification meets UK, EU, NSF, and CSA hygiene standards for food-contact surfaces.
Frequently Asked Questions
Q: Is the VSC146BT fabricated from 304 or 430 grade stainless steel?
A: This unit uses SS201 grade stainless steel, common in commercial sink fabrication for cost efficiency. 304 grade offers higher corrosion resistance in coastal or high-chlorine environments. Confirm grade requirements with your local health authority if 304 specification is mandatory.
Q: What load capacity does the cupboard shelf support?
A: The under-panel at 0.8mm thickness and square leg construction supports typical cleaning chemical containers and stacked utensils. Total cupboard load should not exceed 30kg distributed evenly. Concentrate heavy items like detergent drums on the floor of the cupboard.
Q: Are the legs adjustable for uneven kitchen floors?
A: Yes. Adjustable feet at the base of each 40×40mm leg compensate for floor variances of 10–15mm. Turn feet clockwise to raise, counterclockwise to lower. Lock nuts secure final height once level is achieved.
Q: Does the splashback attach permanently or can it be removed?
A: The splashback is welded to the rear edge of the worktop as a permanent fixture. Removal requires cutting, which voids structural integrity. Specify no-splashback units at time of order if wall-mounted backsplash is preferred.
Q: Can Zodex manufacture this sink in custom dimensions?
A: Custom sizing is available for orders of five units or more. Provide required bowl dimensions, overall width, and height in your enquiry. Lead time extends 4–6 weeks beyond standard stock for fabrication and quality checks.