





Ask a Question About This Product
This offer ends in:
The QNH826 is a commercial work table with enclosed sliding-door cabinet storage, measuring 1400x700x950mm overall. It provides a hygienic stainless steel workspace with rear backsplash for food preparation and equipment staging in commercial kitchens. The enclosed lower cabinet stores utensils, small equipment, or dry goods while maintaining sanitary separation from the work surface.
Commercial Application
This unit functions as a primary prep station in commercial kitchens where floor space is limited. The sliding doors allow access to stored items without requiring swing clearance. The integrated backsplash controls spills and splash during high-volume food preparation.
During service, the 1400x700mm top surface accommodates cutting boards, mixing bowls, and ingredient trays. The internal cabinet holds backup supplies or cleaning materials within arm's reach. The 950mm working height matches standard commercial kitchen counter specifications.
Key Operational Advantages
- 1400mm x 700mm work surface provides 0.98 square metres of usable prep area
- Sliding door mechanism eliminates 400-500mm swing clearance requirement
- 100mm rear backsplash contains liquid spills and prevents wall splash
- Internal cabinet measures 1300mm wide x 560mm high for bulk storage
- 50mm thick reinforced worktop supports heavy equipment loads
- 150mm adjustable stainless steel legs accommodate uneven flooring
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH826 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 48.9 kg (107.8 lbs) |
Construction & Build Quality
The cabinet is fabricated from commercial-grade stainless steel with welded seams and reinforced corners. The 50mm worktop provides structural rigidity under load. The sliding door track system is stainless steel with no exposed plastic components.
- Stainless steel body and door panels resist corrosion in wet environments
- Welded frame construction eliminates fastener failure points
- Internal shelf provides dual-level storage capacity
- Adjustable legs compensate for floor variations up to 25mm
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table directly to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. The unit ships fully assembled or flat-packed depending on destination and freight cost. UK and European deliveries typically occur within 10-14 working days.
Frequently Asked Questions
Q: What grade of stainless steel is used in the QNH826 construction?
A: The QNH826 uses commercial-grade stainless steel throughout. Zodex typically fabricates work tables from 304-grade stainless for food contact surfaces and cabinet construction. Specific material certification can be confirmed at time of order.
Q: What is the maximum load capacity of the worktop?
A: The 50mm reinforced top supports up to 150kg evenly distributed across the work surface. Concentrated point loads should not exceed 50kg in a 300mm diameter area. The internal shelf supports 30kg evenly distributed.
Q: Are the legs adjustable for uneven floors?
A: Yes. The 150mm stainless steel legs feature screw-thread adjustment with a range of approximately 25mm. This allows levelling on floors with minor gradient or unevenness common in commercial kitchens.
Q: Can the internal shelf be repositioned or removed?
A: The internal shelf is fixed during manufacturing at the midpoint of the cabinet height. It can be removed if required, but repositioning requires drilling new mounting holes. Contact TurcoBazaar for modification guidance.
Q: Is custom sizing available for different kitchen layouts?
A: Zodex manufactures work tables in multiple standard sizes. Custom widths, depths, or heights require minimum order quantities and extended lead times of 6-8 weeks. Contact TurcoBazaar with dimensional requirements for feasibility assessment and quotation.