
Ask a Question About This Product
This offer ends in:
The QNH808 is a 600×600mm stainless steel work table with enclosed cabinet storage and integrated backsplash. It provides a hygienic food prep surface with sliding door access to internal shelving. Standard height is 950mm including 150mm adjustable legs and 100mm rear splash guard.
Commercial Application
Used in prep stations where enclosed storage and clean worktop space must occupy the same footprint. Sliding doors eliminate door swing clearance requirements in tight galley layouts. Internal shelf organises utensils, containers or dry goods below the work surface.
Positioned at prep lines or plating stations during service. The 100mm backsplash prevents liquids from running onto adjacent walls or equipment. Operators access stored items without leaving the workstation or bending to floor-level shelving.
Key Operational Advantages
- 600×600×950mm footprint fits standard commercial kitchen module spacing
- Sliding double doors require no swing clearance in narrow prep corridors
- Internal shelf 500mm wide × 560mm high holds six 1/3 gastronorm pans or equivalent dry storage
- 100mm backsplash retains spills and protects wall surfaces from splash contact
- 150mm stainless steel legs allow undersweep cleaning and minor height adjustment
- 23.6 kg weight permits repositioning during kitchen layout changes
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH808 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 23.6 kg (52.0 lbs) |
Construction & Build Quality
Cabinet shell fabricated from food-grade stainless steel with welded seams and reinforced edges. Work surface has 50mm thick bench construction for load distribution across the 600×600mm area. Sliding door track mechanism is integrated into upper cabinet frame to eliminate external hardware exposure.
- Food-grade stainless steel body meets CE hygiene requirements
- 50mm reinforced work surface bench resists deflection under load
- Welded seam construction eliminates gaps where contaminants collect
- 150mm height-adjustable legs compensate for uneven floor surfaces
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the Zodex QNH808 from UK stock with delivery to commercial addresses across the UK, Europe, USA, Canada, Middle East and sub-Saharan Africa. Unit ships as single piece requiring no field assembly beyond leg installation. Standard lead time is 5–7 working days for UK mainland addresses.
Frequently Asked Questions
Q: Is this table constructed from 304 or 430 grade stainless steel?
A: The QNH808 uses food-grade stainless steel meeting CE commercial kitchen material standards. Zodex provides material certification on request for health authority compliance documentation. Grade specification confirmed at order placement.
Q: What is the maximum load capacity for the work surface?
A: The 50mm reinforced bench supports distributed loads typical of food prep equipment and ingredient containers. Concentrated point loads should not exceed 30 kg at any single location. Load capacity documentation available for structural compliance review.
Q: Are the legs adjustable for uneven floor surfaces?
A: The 150mm stainless steel legs include threaded adjustment feet providing approximately 25mm height variance. This compensates for minor floor irregularities common in commercial kitchen environments. Adjustment maintains stability across the four-leg footprint.
Q: Can the internal shelf be repositioned or removed?
A: The mid-level shelf is fixed at 560mm internal height during manufacture. Removal requires disassembly of cabinet frame. Custom shelf positioning available through factory order for project-specific requirements.
Q: Is custom sizing available for non-standard kitchen layouts?
A: Zodex manufactures work tables in modular 100mm increments from 400mm to 2000mm width. Custom depth and height specifications require factory quotation with 4–6 week lead time. Minimum order quantity applies to non-catalogue dimensions.