





Ask a Question About This Product
This offer ends in:
The QNH834 is a stainless steel work table with enclosed sliding door storage, an internal shelf, and a 100mm rear splashback. The unit provides 800x500mm working surface at 950mm height. Built for commercial prep stations where surface hygiene and enclosed storage are required simultaneously.
Commercial Application
Used in central prep zones where operators need direct access to stored dry goods, smallwares, or plated items while maintaining continuous workflow. The enclosed cabinet keeps non-refrigerated items dust-free during service. Sliding doors do not obstruct adjacent workspace in confined kitchen layouts.
Operators position equipment or prep trays on the work surface while accessing stored ingredients or tools from the cabinet below. The 100mm backsplash contains liquid spills during washing, portioning, or assembly tasks. Internal shelf doubles usable storage volume for stacked containers or boxed dry goods.
Key Operational Advantages
- 800x500mm work surface with 50mm reinforced top — load-bearing for equipment placement
- Enclosed cabinet with internal shelf: 700mm wide × 560mm high internal dimensions
- 100mm stainless steel backsplash prevents wall splash during wet prep tasks
- Sliding double doors — space-saving access in narrow galley kitchens
- 150mm height-adjustable stainless steel legs accommodate uneven flooring
- 26.4 kg unit weight — relocatable without mechanical handling equipment
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | QNH834 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 26.4 kg (58.2 lbs) |
Construction & Build Quality
Body fabricated from food-grade stainless steel with welded seams. Work surface is 50mm thick reinforced construction. Sliding door tracks are flush-mounted to prevent debris accumulation.
- Food-grade stainless steel throughout — non-porous surface meets hygiene codes
- Welded corner joints — no gaps for bacterial harbourage
- Adjustable 150mm legs with levelling feet — compensates for floor variance up to 20mm
- Flush-mounted sliding tracks — cleanable without tool disassembly
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the QNH834 from UK stock to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Zodex manufactures the unit to CE compliance standards recognised under UK, EU, NSF, and CSA commercial kitchen regulations. Freight is calculated per destination and order volume.
Frequently Asked Questions
Q: What grade of stainless steel is used in the QNH834 construction?
A: The unit is fabricated from food-grade stainless steel meeting commercial kitchen hygiene standards. Specific alloy grade (304 or 430) can be confirmed via technical enquiry prior to order. Both grades are non-porous and cleanable to sanitation codes.
Q: What is the maximum load capacity for the work surface?
A: The 50mm reinforced top is designed for equipment placement and prep task loads typical in commercial use. Distributed loads of 80-100 kg are within design parameters. Concentrated point loads should be distributed via equipment feet or cutting boards.
Q: Are the legs and shelf positions adjustable after installation?
A: The 150mm legs include levelling feet adjustable up to 20mm for uneven floors. The internal shelf is fixed during fabrication at mid-height position (approximately 280mm above cabinet base). Custom shelf positioning requires pre-order specification.
Q: Can the backsplash height be modified or removed?
A: The standard unit includes a welded 100mm backsplash. Removal is not recommended as it compromises structural integrity and wall protection. Custom backsplash heights (150mm or 200mm) may be available on request with extended lead time.
Q: Is custom sizing available for non-standard kitchen layouts?
A: TurcoBazaar can request custom dimensions from the manufacturer for orders requiring specific width, depth, or height parameters. Custom fabrication extends lead time by 4-6 weeks and requires minimum order quantities. Contact for feasibility assessment and quotation.