





Ask a Question About This Product
This offer ends in:
The WTG600X60050R is a flat-pack stainless steel work table measuring 600×600×900mm with rear upstand and bottom shelf. It provides 185 kg top shelf capacity and 155 kg under-shelf capacity for ingredient staging and equipment placement. Used in commercial kitchens, hotel prep zones, and catering production environments where space-efficient, hygienic work surfaces are required.
Commercial Application
This unit serves as a dedicated food prep station in constrained kitchen layouts. The rear upstand prevents spillage migration to walls. The lower shelf holds backup containers, small equipment, or cleaned utensils during service.
Operators use it for portioning, plating, and assembly tasks where frequent sanitisation is mandatory. The 600×600mm footprint fits into corner zones or alongside cooking ranges. Both shelves remain accessible without requiring operators to bend or reach beyond safe ergonomic limits.
Key Operational Advantages
- Top shelf supports 185 kg, under-shelf supports 155 kg
- 2mm 430 stainless steel top with square slant front edge
- Galvanised under-shelf and leg construction with plastic bullet feet
- Rear upstand prevents liquid run-off to adjacent walls
- Ships flat-packed; assembly required on-site
- 15.7 kg unit weight for ease of positioning
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WTG600X60050R |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 15.7 kg (34.6 lbs) |
Construction & Build Quality
The work surface uses 2mm 430-grade stainless steel with a square slant front edge that directs spills back toward the operator. Legs and sockets are galvanised steel. The under-shelf is galvanised 2mm sheet. Plastic bullet feet provide floor contact and minor height adjustment.
- 2mm 430 stainless steel top surface
- Galvanised steel legs and under-shelf
- Plastic adjustable bullet feet
- Rear upstand welded to top surface
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table from UK stock to commercial buyers in Europe, North America, the Middle East, and Africa. The unit is CE-certified and meets NSF and CSA hygiene standards for food contact surfaces. Flat-pack shipping reduces freight costs for multi-unit orders.
Frequently Asked Questions
Q: Is this 304 or 430 stainless steel?
A: The top surface is 2mm 430-grade stainless steel. This grade offers adequate corrosion resistance for dry and moist food prep. It is not suited for prolonged exposure to acidic marinades or salt brines.
Q: What is the maximum safe load per shelf?
A: Top shelf: 185 kg evenly distributed. Under-shelf: 155 kg evenly distributed. Concentrated point loads near edges reduce these limits.
Q: Are the legs height-adjustable?
A: Plastic bullet feet provide minor height adjustment to compensate for uneven floors. Total adjustment range is approximately ±10mm per foot.
Q: Can the rear upstand be removed or repositioned?
A: The upstand is welded to the rear edge of the top shelf. It cannot be removed without cutting. Custom configurations require factory specification at time of order.
Q: Is custom sizing available for tighter kitchen layouts?
A: Zodex manufactures tables in 100mm width increments from 400mm to 2000mm. Custom depth and height options require minimum order quantities and longer lead times. Contact TurcoBazaar for quotations.