
Ask a Question About This Product
This offer ends in:
The THASR207 is a 2000mm wide stainless steel worktop cupboard with integrated sliding-door storage below a food-contact work surface. It provides 700mm depth and 900mm working height for prep stations in commercial kitchens. Sliding doors conceal bulk dry goods, utensils, or plating equipment during service.
Commercial Application
Floor cupboards combine worktop space with enclosed storage where wall-mounted shelving is impractical. The unit replaces separate work tables and base cabinets in prep zones, bakery lines, or hot-hold staging areas. Operators use the surface for portioning, assembly, or cooling while storing ingredients and tools directly below.
During service, sliding doors allow quick access without door-swing clearance. The 2000mm width accommodates two-person simultaneous prep at opposite ends. Enclosed storage keeps dry goods away from spray zones and maintains visual order in open kitchens.
Key Operational Advantages
- 2000mm × 700mm worktop spans two prep stations or one full plating line
- Sliding doors require no swing clearance in narrow aisles or tight layouts
- 900mm height aligns with standard counter heights for standing work
- 64kg weight provides stability under lateral force during cutting or rolling
- Stainless steel construction across all surfaces meets food-contact hygiene codes
- 700mm depth matches standard chefs' counters for flush installation along walls
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THASR207 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 64.0 kg (141.1 lbs) |
Construction & Build Quality
All surfaces are stainless steel, including worktop, doors, frame, and interior shelving. Welds are ground smooth to prevent moisture traps. The 64kg mass and bolted leg assembly resist racking under uneven loading or repeated door operation.
- Stainless steel worktop, cabinet body, and sliding door panels
- Ground welds at all joints to meet commercial hygiene inspection standards
- Adjustable legs compensate for uneven floors and set final working height
- Sliding door tracks prevent door sag during repeated daily use
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the Zodex THASR207 from UK inventory to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. CE certification covers EU and UK hygiene standards; the unit meets equivalent NSF and CSA food-contact requirements for North American installation. Freight quotations for international shipments include port-to-door logistics and customs documentation.
Frequently Asked Questions
Q: What grade of stainless steel is used in the THASR207?
A: Zodex typically uses AISI 304 stainless steel for food-contact surfaces and structural components. Confirm steel grade with TurcoBazaar if your jurisdiction requires mill test certificates for health inspections.
Q: What is the maximum load capacity for the worktop surface?
A: Distributed load capacity is approximately 150–200 kg across the 2000mm span, depending on leg adjustment and floor levelness. Concentrated point loads (mixers, slicers) should not exceed 40 kg at worktop centre without additional bracing.
Q: Are the internal shelves adjustable or removable?
A: Standard configuration includes one fixed mid-height shelf. Adjustable shelving or additional tiers require specification at order. Contact TurcoBazaar for custom internal layouts.
Q: Can a splashback be added to the rear of the unit?
A: Splashbacks are not included but can be field-installed using stainless steel sheet and angle brackets. TurcoBazaar can supply matching-grade sheet stock cut to width if ordered with the cabinet.
Q: Is custom width or depth available for non-standard layouts?
A: Zodex produces custom widths in 100mm increments and alternative depths (600mm, 800mm). Lead time extends to 4–6 weeks for factory-custom units. Minimum order quantities may apply for non-catalogue dimensions.