



Ask a Question About This Product
This offer ends in:
Single-lever stainless steel mixer tap rated for commercial wash and prep areas. Operates with 35 mm ceramic cartridge and SS304 flexible inlet hoses. Installed in hotel kitchens, restaurant prep sinks, and catering facilities where hygiene compliance and daily thermal cycling matter.
Commercial Application
Mounted on stainless steel sinks or worktables where hand-washing, vegetable prep, and utensil rinsing occur throughout service. Single-lever operation allows temperature and flow adjustment with one hand, reducing cross-contamination when gloves are worn or hands are wet.
Used during prep shifts, cooking service, and breakdown cleaning cycles. 330 mm height clears stock pots and large containers. Stainless steel construction withstands chemical cleaning agents specified in HACCP protocols.
Key Operational Advantages
- All-stainless body, handle, spout, and fixing nut — no plated zinc alloy components
- 35 mm ceramic cartridge rated for 500,000 cycles in hot and cold water duty
- 40 cm SS304 braided inlet hoses included — no separate purchase required
- 230 mm width and 330 mm height clear standard commercial sink basins
- CE certified for food contact zones under UK and EU hygiene directives
- 1.3 kg weight simplifies overhead installation on thin-gauge sink decks
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | 3047003 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 1.3 kg (2.9 lbs) |
Construction & Build Quality
Body, spout, handle, and fastening hardware manufactured from stainless steel. Ceramic cartridge sealed with EPDM gaskets rated for potable water temperatures up to 80°C. Inlet hoses use SS304 braided outer jacket over rubber core, crimped with brass ferrules.
- Stainless steel surface resists chlorine-based sanitizers and acidic cleaning compounds
- Ceramic cartridge maintains seal integrity under daily thermal shock cycles
- Braided SS304 inlet hoses supplied pre-assembled with 1/2-inch BSP adaptors
- Single-piece spout eliminates internal joints where bacteria accumulate
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial fittings from UK inventory to hospitality and catering operators in the UK, Europe, North America, Middle East, and Africa. Zodex model 3047003 dispatched within 1–3 working days to UK mainland addresses. International freight calculated at checkout for EU, USA, Canada, UAE, and other territories.
Frequently Asked Questions
Q: Is this tap manufactured from 304 or 430 stainless steel?
A: Body and spout are 304-grade stainless steel. Fastening hardware is 304 stainless. Zodex does not use 430 grade in this model.
Q: What is the maximum sink deck thickness this tap can penetrate?
A: Threaded shank and included fixing nut accommodate deck thickness up to 50 mm. Thicker decks require spacer washers or extended shank, available separately.
Q: Does the tap include aerator or flow restrictor?
A: No aerator fitted. Spout delivers unrestricted flow required for filling large stock pots. Flow rate depends on inlet pressure, typically 12–15 litres per minute at 3 bar.
Q: Can the tap be mounted on a wall instead of a sink deck?
A: This model is deck-mounted only. Wall-mounted commercial mixer taps require different body design and concealed inlet manifold, available under separate Zodex model codes.
Q: What warranty applies to the ceramic cartridge?
A: Zodex provides 12-month warranty against manufacturing defects in the cartridge. Seal failure caused by sediment or pressure surge is not covered. Water filtration extends cartridge life in hard water areas.