



Ask a Question About This Product
This offer ends in:
A 2-metre stainless steel work table with integrated drawer storage and lower shelf. Designed for food preparation workflows requiring hygienic surfaces, accessible utensil storage, and stable load-bearing capacity. Used in commercial kitchens, hotel prep areas, and catering production environments where workspace and storage must be combined.
Commercial Application
The unit provides a non-porous food-contact surface with two drawers positioned for immediate access to knives, utensils, and small prep tools. The bottom shelf holds bulk containers, pots, or packaged goods within arm's reach. This reduces movement during high-volume service periods.
The 100mm upstand prevents liquids and food waste from running onto adjacent walls or equipment. The table supports up to 500 kg distributed load, allowing safe placement of mixers, slicers, or stacked crates during prep shifts. Adjustable feet compensate for uneven flooring.
Key Operational Advantages
- 2000×700 mm work surface with 201 AISI stainless steel construction
- Two full-width drawers for utensil and tool storage
- Lower shelf rated for bulk container storage
- 100 mm rear upstand to contain spills and splashes
- Adjustable height from 850 to 900 mm via levelling feet
- Load capacity 500 kg distributed across reinforced worktop
- 40×40 mm square leg framework with Scotch Brite finish
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | THATS207A2D |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 45.0 kg (99.2 lbs) |
Construction & Build Quality
The worktop is fabricated from double-walled 201 AISI stainless steel with a Scotch Brite finish for abrasion resistance and hygiene compliance. Square legs measure 40×40 mm and provide structural rigidity under sustained load. All welds are ground flush to prevent bacterial harbourage.
- 201 AISI stainless steel throughout — worktop, legs, shelf, upstand
- Double-walled worktop construction for rigidity and noise damping
- Scotch Brite finish resists scratching and simplifies sanitation
- Adjustable feet with thread adjustment for floor levelling
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex work table from UK stock for dispatch to commercial operators in the United Kingdom, Europe, North America, Middle East, and sub-Saharan Africa. All units ship flat-packed for cost-effective freight. Assembly hardware and instructions are included.
Frequently Asked Questions
Q: What grade of stainless steel is used in the THATS207A2D table?
A: The unit is constructed from 201 AISI stainless steel, which provides corrosion resistance and hygiene compliance for food preparation environments. It meets CE, NSF, and CSA commercial kitchen material standards.
Q: What is the maximum load capacity of the worktop?
A: The reinforced worktop supports up to 500 kg distributed load. This capacity accommodates mixers, slicers, and stacked storage containers during active service.
Q: Are the legs and shelf height adjustable?
A: Height adjusts from 850 to 900 mm via threaded levelling feet on each leg. The lower shelf is fixed in position beneath the worktop. The upstand adds 100 mm to total height.
Q: Can the upstand be removed or modified?
A: The 100 mm upstand is welded to the worktop perimeter as part of the structural assembly. Custom configurations without upstand or with increased height require factory consultation before ordering.
Q: Is custom sizing available for narrower or longer dimensions?
A: Zodex manufactures this model in standard 2000×700 mm dimensions. Custom width or depth configurations require minimum order quantities and extended lead times. Contact TurcoBazaar for technical feasibility and pricing.