Professional Work table 3 drawers Stainless steel Bottom shelf Upstand 1600x700x900mm | TurcoBazaar THATS167A3D

Professional Work table 3 drawers Stainless steel Bottom shelf Upstand 1600x700x900mm | TurcoBazaar THATS167A3D
Professional Work table 3 drawers Stainless steel Bottom shelf Upstand 1600x700x900mm | TurcoBazaar THATS167A3D
Professional Work table 3 drawers Stainless steel Bottom shelf Upstand 1600x700x900mm | TurcoBazaar THATS167A3D
Professional Work table 3 drawers Stainless steel Bottom shelf Upstand 1600x700x900mm | TurcoBazaar THATS167A3D
Professional Work table 3 drawers Stainless steel Bottom shelf Upstand 1600x700x900mm | TurcoBazaar THATS167A3D
This offer ends in:
Days
Hours
Min
Sec
from Save -66%
£411.60
£1,194.00
Ex Tax: £411.60
  • Brand: Zodex
  • Model: THATS167A3D
  • SKU: THATS167A3D
Sold: 0
Views: 980
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

This 1600x700x900mm stainless steel work table provides a hygienic preparation surface for commercial kitchens and catering operations. Three integrated drawers store utensils and small prep tools within arm's reach. The unit includes a bottom shelf for storage and a raised upstand to contain spills.

Commercial Application

Kitchen managers install this table in prep zones where drawer access speeds service workflow. The three-drawer configuration keeps portioning tools, thermometers, and garnish equipment organized at the work surface. The bottom shelf holds backup ingredient containers or sanitizer bottles.

During service prep, cooks use the raised upstand to prevent liquids from running onto floors or adjacent equipment. The 1600mm width accommodates two operators working side-by-side on separate tasks. Adjustable feet level the table on uneven kitchen floors without shimming.

Key Operational Advantages

  • 1600x700mm work surface in 201 AISI stainless steel with Scotch Brite finish
  • Three drawers for utensil storage at prep height
  • Bottom shelf adds 1600x700mm storage plane for containers or equipment
  • 100mm upstand contains spills and prevents cross-contamination
  • 40x40mm square stainless steel legs with adjustable feet for leveling
  • Double-walled worktop supports up to 500 kg distributed load

Technical Specifications

SpecificationDetails
Model / SKUTHATS167A3D
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight42.0 kg (92.6 lbs)

Construction & Build Quality

The table uses 201 AISI stainless steel throughout. The 60mm worktop is double-walled for rigidity under load. Square 40x40mm legs provide lateral stability and support adjustable feet.

  • 201 AISI stainless steel with Scotch Brite finish resists corrosion in wet environments
  • 60mm double-walled worktop construction supports 500 kg capacity
  • 40x40mm square legs resist lateral movement during heavy prep work
  • Adjustable feet allow height range from 850mm to 900mm working height

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial furniture to kitchens in the UK, Europe, USA, Canada, Middle East, and Africa. This model ships disassembled to reduce freight costs on international orders. Assembly hardware is included.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical guidance on steel grade selection or freight quotation for bulk orders. WhatsApp available for rapid response on specification queries.
Contact Our Team

Frequently Asked Questions

Q: What stainless steel grade is used in the THATS167A3D table?

A: This model uses 201 AISI stainless steel. It provides corrosion resistance suitable for commercial kitchen environments at a lower cost than 304 grade. Scotch Brite finish aids daily cleaning.

Q: What is the load-bearing capacity of the worktop?

A: The double-walled 60mm worktop supports up to 500 kg distributed load. This capacity accommodates heavy equipment like mixers or sinks. Concentrated point loads require reinforcement.

Q: Are the legs and shelf height adjustable?

A: Adjustable feet provide height range from 850mm to 900mm working surface. The bottom shelf is fixed. Leg adjustment compensates for uneven flooring without additional leveling hardware.

Q: What is the upstand height and function?

A: The 100mm upstand prevents liquids from spilling off the rear edge. It protects wall surfaces and adjacent equipment from splash contamination. Total height with upstand is 950mm to 1000mm.

Q: Can this table be supplied in custom dimensions or with different drawer counts?

A: Zodex manufactures work tables in standard and custom sizes. Lead time for non-standard dimensions is typically 6-8 weeks. Contact TurcoBazaar with specific dimensional or drawer configuration requirements.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.