



Ask a Question About This Product
This offer ends in:
The VT206SL is a 2-metre stainless steel work table with integrated bottom shelf for high-volume commercial food preparation. It provides 1.2 m² of hygienic work surface at standard 850 mm height with adjustable feet. Used in hotel kitchens, catering production units, and restaurant prep areas where load capacity and cleanability are critical.
Commercial Application
This table functions as fixed prep station for raw material processing, ingredient assembly, and plated dish staging. The bottom shelf holds bulk containers, service equipment, or backup stock within arm's reach. Adjustable feet accommodate uneven floors common in older commercial buildings.
Operators use this table during mise en place, bulk vegetable prep, and assembly line catering production. The 500 kg load capacity supports heavy mixers, slicers, or stacked tray trolleys. The 2-metre length allows two-person side-by-side work during peak service prep.
Key Operational Advantages
- 2000×600 mm work surface provides 1.2 m² hygienic food contact area
- 500 kg load-bearing capacity supports heavy equipment and bulk ingredient storage
- 201 AISI stainless steel construction with Scotch Brite finish resists corrosion in wet environments
- 40×40 mm square leg frame with adjustable feet compensates for uneven flooring
- Integrated bottom shelf increases vertical storage capacity without additional footprint
- Disassembled shipping reduces freight cost and simplifies doorway access during installation
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | VT206SL |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 44.0 kg (97.0 lbs) |
Construction & Build Quality
Constructed from 201 AISI stainless steel with Scotch Brite finish for cleanability. Work surface features double-walled construction with upturned edges to contain spills. Square 40×40 mm leg frame includes adjustable feet for levelling on uneven commercial kitchen floors.
- 201 AISI stainless steel throughout with Scotch Brite finish
- Double-walled worktop with 60 mm reinforced edge construction
- Welded 40×40 mm square leg frame rated to 500 kg distributed load
- Height-adjustable feet provide 830–870 mm working height range
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial preparation equipment to buyers in the UK, Europe, North America, the Middle East, and sub-Saharan Africa. The VT206SL ships disassembled to reduce freight cost and simplify site access. Assembly hardware and illustrated instructions are included with each unit.
Frequently Asked Questions
Q: What grade of stainless steel is used in the VT206SL?
A: The VT206SL is constructed from 201 AISI stainless steel throughout. This grade provides corrosion resistance and cleanability for commercial food contact use at lower cost than 304 grade. It meets CE, NSF, and CSA hygiene standards for professional kitchen equipment.
Q: What is the maximum load-bearing capacity?
A: The table supports up to 500 kg distributed load on the worktop. This capacity accommodates heavy mixers, slicers, or stacked ingredient containers. Concentrated loads should be positioned over leg frame points for structural integrity.
Q: Are the legs and shelf height adjustable?
A: Adjustable feet provide 830–870 mm working height range to level the table on uneven floors. The bottom shelf is fixed at approximately 150 mm above floor level. Custom shelf configurations require quotation from the manufacturer.
Q: Can splash-backs be added to this model?
A: Zodex manufactures compatible splash-backs for the VT206SL in heights from 100 mm to 400 mm. Splash-backs mount to the rear edge of the worktop using stainless steel brackets. Contact TurcoBazaar for compatibility confirmation and pricing.
Q: Is custom sizing available for non-standard kitchen layouts?
A: Zodex produces work tables in custom lengths from 600 mm to 3000 mm and depths from 600 mm to 800 mm. Minimum order quantities and lead times apply to non-standard dimensions. Submit floor plan measurements for technical feasibility review and quotation.