Stainless Steel Work Table Bottom Shelf & Upstand 1500x700x900mm | TurcoBazaar ETW15070B

Stainless Steel Work Table Bottom Shelf & Upstand 1500x700x900mm | TurcoBazaar ETW15070B
3-4 Weeks
Stainless Steel Work Table Bottom Shelf & Upstand 1500x700x900mm | TurcoBazaar ETW15070B
This offer ends in:
Days
Hours
Min
Sec
from Save -58%
£193.20
£463.20
Ex Tax: £193.20
  • Stock: 3-4 Weeks
  • Brand: Zodex
  • Model: ETW15070B
  • SKU: ETW15070B
Sold: 0
Views: 949
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The ETW15070B is a commercial-grade stainless steel work table measuring 1500×700×900 mm with integrated bottom shelf and rear upstand. It provides a flat preparation surface for food contact environments requiring non-porous, cleanable workspace. The table is supplied flatpacked with galvanised undershelf and adjustable bullet feet.

Commercial Application

Work tables function as primary preparation zones in commercial kitchens where food is trimmed, portioned, assembled, or plated. The rear upstand prevents spillage onto wall surfaces and creates a defined work boundary. The bottom shelf stores ingredients, containers, or utensils within reach of the operator.

During prep service, the 1500 mm length accommodates two operators working side by side or one operator managing multiple tasks. The 700 mm depth allows tray placement perpendicular to the front edge without overhang. Height at 900 mm suits standing work without excessive bending.

Key Operational Advantages

  • 1.0 mm stainless steel top surface with 50 mm rear upstand
  • 1.0 mm galvanised steel undershelf with hat channel reinforcement
  • Galvanised leg construction with plastic bullet feet for levelling on uneven floors
  • CE certified for commercial kitchen hygiene standards (UK, EU, NSF, CSA equivalent)
  • Flatpacked delivery at 21 kg total weight for freight cost reduction
  • Supplied by Zodex with 12-month spare parts warranty

Technical Specifications

SpecificationDetails
Model / SKUETW15070B
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.
Weight21.0 kg (46.3 lbs)

Construction & Build Quality

The work surface uses 1.0 mm grade stainless steel with welded rear upstand. Legs are galvanised steel with socket joints. The undershelf is 1.0 mm galvanised steel supported by hat channel framework. Bullet feet are high-density plastic with threaded adjustment for floor levelling.

  • Stainless steel top: 1.0 mm thickness, welded upstand joint
  • Galvanised undershelf: 1.0 mm with hat channel support
  • Legs: Galvanised steel with socket mounting system
  • Feet: Adjustable plastic bullets for uneven floor compensation

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies the ETW15070B from UK inventory to commercial operators worldwide. Delivery is confirmed to UK mainland, Europe, USA, Canada, Middle East, and Africa. The table ships flatpacked to reduce freight volume and cost on international orders.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical specifications, assembly instructions, or freight estimates for multi-table orders. WhatsApp enquiries are handled during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel is used for the work surface?

A: The top surface is 1.0 mm stainless steel, grade 201. This is a lower-nickel austenitic alloy suitable for dry food preparation and indoor use. For high-moisture or acidic environments, request grade 304 specification at time of order.

Q: What is the maximum load capacity of the work surface and undershelf?

A: The top surface supports approximately 100 kg evenly distributed. The galvanised undershelf is rated for 40 kg evenly distributed across the full shelf area. Concentrated loads should be positioned over leg locations.

Q: Are the legs height-adjustable?

A: The legs have fixed height at 900 mm to the top surface. Plastic bullet feet provide ±15 mm adjustment for levelling on uneven floors. Custom leg heights are not available for this model.

Q: Can the rear upstand be removed or is it welded?

A: The 50 mm upstand is welded to the top surface and cannot be removed. If a flush-edge table is required, specify no-upstand configuration at order stage.

Q: Is custom sizing available for different kitchen layouts?

A: The ETW15070B is a standard production model at 1500×700×900 mm. Custom widths, depths, or heights require separate quotation and extended lead time. Contact TurcoBazaar technical team with dimensional requirements.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Frequently Asked Questions

Do you ship from the UK to the USA, Europe and worldwide?

Yes. TurcoBazaar is a UK-based commercial kitchen equipment supplier, and we ship to the USA, Canada, Europe, the UK and worldwide. We regularly support restaurants, hotels, takeaways, food trucks, catering companies and commercial kitchens with international equipment supply.

Are your products suitable for the USA, Canada, Europe and the UK?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use. Many products are built to NSF-level hygiene and commercial-use expectations; however, NSF certification requirements may vary by model, country, state, province and local authority. Where required, we can support customers with technical documents for local checks.

Can this equipment be used commercially?

Yes. Our products are designed for restaurants, hotels, takeaways, ghost kitchens, food trucks, cafes, commercial kitchens and professional catering businesses. TurcoBazaar focuses on durable commercial-grade equipment rather than low-quality disposable alternatives.

What gas and electrical options are available?

Depending on the model, equipment can be supplied or produced for LPG, Natural Gas, 110V, 220V or 380V operation. Available options can usually be selected directly on the product page before ordering.

Are your products CE certified?

Yes. Our equipment is CE certified and manufactured for professional commercial kitchen use, with strong focus on durability, hygiene, safety and international commercial standards.

Do you provide after-sales support?

Yes. TurcoBazaar provides professional after-sales support, technical guidance and spare parts support for commercial customers worldwide, including the UK, Europe, the USA and Canada.

Can you help with international shipping and freight costs?

Yes. We regularly support commercial customers across Europe and worldwide with efficient international shipping solutions. If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size and freight options to provide a custom shipping quotation where possible.