
Ask a Question About This Product
This offer ends in:
The ETW17070B is a 1700×700mm stainless steel work table with integrated bottom shelf and 50mm rear upstand. It provides 1.19 m² of hygienic food contact surface at 900mm working height. Manufactured by Zodex for commercial kitchens, catering operations, and prep areas requiring CE-compliant food-safe workspace.
Commercial Application
Work tables with bottom shelves and upstands reduce cross-contamination risk during food preparation. The lower shelf holds backup ingredients or equipment within arm's reach. The rear upstand prevents liquid spillage onto wall surfaces and electrical fixtures.
Operators use this table during prep service for vegetable cutting, portioning, and plating workflows. The 1700mm length accommodates two-person simultaneous use. The 700mm depth fits standard commercial kitchen layouts without obstructing traffic lanes.
Key Operational Advantages
- 1.0mm stainless steel top surface — non-porous food contact grade
- 1.0mm galvanised steel undershelf with hat channel reinforcement
- 23 kg unit weight ships flatpacked for reduced freight cost
- 50mm integral rear upstand prevents spill migration
- Galvanised leg construction with adjustable bullet feet
- CE certified for UK, EU, NSF (USA), and CSA (Canada) hygiene standards
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | ETW17070B |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 23.0 kg (50.7 lbs) |
Construction & Build Quality
Top deck is 1.0mm stainless steel with 50mm formed upstand welded at rear edge. Undershelf uses 1.0mm galvanised steel supported by hat channel frame. Legs are galvanised steel tube with socket fittings and plastic bullet feet for level adjustment.
- Stainless steel grade suitable for direct food contact
- Galvanised steel components resist moisture in wet prep environments
- Flatpack design reduces shipping volume by 60% versus assembled units
- Socket-mounted legs allow field assembly without specialised tools
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex commercial stainless steel tables to UK operators and international buyers. Freight quotations cover pallet shipment to Europe, USA, Canada, Middle East, and Africa. Lead time is 1–3 working days for UK mainland delivery.
Frequently Asked Questions
Q: What stainless steel grade is used for the top surface?
A: The top deck is manufactured from food-grade stainless steel meeting CE and NSF food contact standards. Zodex typically uses 201 or 304 grade stainless for commercial table surfaces. Material certificates available on request.
Q: What is the maximum load capacity for the undershelf?
A: The galvanised undershelf with hat channel reinforcement supports up to 40 kg evenly distributed load. Concentrated point loads should not exceed 15 kg at shelf centre. Load rating applies to level installation on solid flooring.
Q: Are the legs height-adjustable?
A: Plastic bullet feet provide ±20mm height adjustment to compensate for uneven floors. Total installed height ranges from 880mm to 920mm at worktop surface. Legs are not telescopic but adjustable via threaded feet.
Q: Can the upstand be removed or is it welded?
A: The 50mm rear upstand is welded to the top deck as an integral component. It cannot be removed without cutting. For applications requiring no upstand, specify model without suffix 'B'.
Q: Is assembly required and what tools are needed?
A: Unit ships flatpacked and requires field assembly. Two people can complete assembly in 15 minutes using socket wrench and screwdriver. All fasteners and socket fittings are included.