Commercial Stick Waffle Maker 6 STICKS 230V Non-Stick Waffle Machine

Q: What are the dimensions and weight of each stick waffle produced?

A: Each stick measures approximately 20cm length and 3cm width when fully cooked. Weight varies with batter recipe but averages 60–70g per stick. Pattern depth is 8mm.

Q: How many waffle cycles can the W17 complete per hour during continuous operation?

A: Operators typically complete 12–15 cycles per hour depending on batter type and desired browning level. This yields 72–90 individual stick waffles per hour. Recovery time between cycles is under 30 seconds.

Q: Does the W17 require dedicated electrical supply or can it share a circuit?

A: The 1400W load at 230V draws 6.1A continuous current. A dedicated 13A circuit is recommended to avoid nuisance tripping when other equipment operates simultaneously. Standard UK 13A plug fitted.

Q: What material are the cooking plates and how is cleaning performed?

A: Plates are cast aluminium with industrial Teflon non-stick coating. Cleaning is performed with damp cloth while plates are warm but not hot. No abrasive pads or solvents required.

Q: How does commercial construction differ from domestic waffle makers?

A: Commercial units use heavier-gauge stainless steel, calibrated thermostats, and heating elements rated for eight-hour shifts. Plate coating thickness is triple that of consumer models. Duty cycle supports 100+ batches per day without component failure.