



Ask a Question About This Product
This offer ends in:
The PZ0214 is a rotating display warmer for churros, pretzels, and similar baked snacks up to 14 inches in width. Internal lamp and glass panels maintain product visibility while adjustable thermostat controls heat at 1.44 kW on 220–240V supply. Operated at snack bars, concession stands, food trucks, and front-of-house catering stations.
Commercial Application
Holds prepared churros or pretzels at serving temperature during peak service periods. Rotating rack cycles product through heated zone while maintaining customer sightlines. Removable water tank provides humidity control to prevent surface drying on dough-based snacks.
Used in high-traffic front-of-house locations where visual merchandising drives impulse sales. Internal lamp illuminates product during evening service or indoor venues. Thermostat adjustment compensates for ambient temperature in outdoor concession or climate-controlled retail.
Key Operational Advantages
- Rotating rack cycles 14-inch snacks through heated display zone at controlled speed
- Adjustable thermostat regulates temperature from 30°C to 85°C via dial control
- Internal lamp operates on separate circuit for independent product illumination
- Removable water tank allows humidity adjustment without unit shutdown
- Glass panels on four sides provide 360-degree customer visibility
- Stainless steel construction with 25 kg weight suitable for mobile concession setup
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | PZ0214 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 25.0 kg (55.1 lbs) |
Construction & Build Quality
Cabinet fabricated from stainless steel with tempered glass panels on all viewing sides. Internal heating element rated at 1.44 kW with thermostat control mounted on exterior panel. Rotating mechanism driven by low-speed motor with rack assembly removable for cleaning.
- Stainless steel exterior resists corrosion in humid or outdoor concession environments
- Tempered glass panels withstand thermal cycling and contact during service
- Water tank mounts internally with external access door for refill without disassembly
- Rotating rack assembly lifts out for daily wash-down and sanitization
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the Zodex PZ0214 from UK warehouse with freight options to Europe, North America, Middle East, and Africa. Unit ships as single 25 kg package with standard 220–240V configuration. Voltage adapters or transformer requirements for 110V regions should be confirmed at order.
Frequently Asked Questions
Q: What temperature range does the adjustable thermostat cover?
A: Thermostat adjusts from 30°C to 85°C via front-mounted dial. Temperature holds ±3°C during continuous operation. Higher settings reduce humidity retention for drier snack surfaces.
Q: Can the rotating rack be disabled for stationary display?
A: Motor connects via internal switch accessible through base panel. Rack locks in fixed position when motor disengaged. Heating and lamp functions operate independently of rotation.
Q: How often does the water tank require refilling during service?
A: Tank capacity supports 6–8 hours of humidity output at moderate thermostat settings. Refill frequency increases at higher temperatures or low-humidity environments. External access door allows refill without cooling unit.
Q: What voltage conversion is required for 110V operations in North America?
A: Unit requires step-up transformer rated minimum 1.5 kW for 110V supply regions. Transformer not included with standard shipment. Confirm voltage requirements at order to coordinate transformer sourcing.
Q: Does the pretzel rack insert fit without modification to the standard churro configuration?
A: Pretzel rack insert mounts to existing rotating mechanism with pin-lock assembly. No tools required for changeover between churro and pretzel configurations. Insert sold separately and must be specified at order.