





Ask a Question About This Product
This offer ends in:
The H60D is a pass-through digital dishwasher for high-volume commercial operations. It processes up to 50 racks per hour with selectable cycles of 70, 100, or 130 seconds. Operated by kitchen staff in hotels, restaurants, and catering facilities where continuous warewashing is required.
Commercial Application
This unit solves the bottleneck problem in commercial kitchens where manual washing cannot keep pace with service demand. The pass-through configuration allows dirty items to enter from one side and clean items to exit on the other, maintaining separation between soiled and clean zones. Integrated detergent and rinse pumps eliminate manual chemical dosing.
During peak service hours, kitchen staff load racks continuously while the machine maintains consistent 82°C rinse temperature for sanitisation. The 50-rack hourly capacity translates to approximately 1000-1200 plates per hour depending on rack configuration. Three cycle options allow operators to match wash time to soil level and service pressure.
Key Operational Advantages
- Processes 50 racks per hour with three selectable cycle durations: 70, 100, or 130 seconds
- 3kW wash pump and 12kW rinse system deliver 82°C rinse temperature for thermal sanitisation
- Deep drawn tank with coved corners removes dirt traps and simplifies end-of-shift cleaning
- Rotating stainless steel wash and rinse arms with wide-angle fan nozzles provide full rack coverage
- Built-in detergent and rinse pumps automate chemical delivery and eliminate manual dosing errors
- 400V 3-phase hardwired power supply provides stable performance under continuous operation
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | H60D |
| Power Output | 3kW |
| Voltage | 400V |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 102.0 kg (224.9 lbs) |
Construction & Build Quality
The H60D uses a deep drawn stainless steel tank with coved corners to eliminate joints where debris accumulates. Rotating wash and rinse arms are stainless steel with wide-angle fan nozzles. The 102 kg frame is built for fixed installation in commercial warewashing areas.
- Stainless steel wash and rinse arm assembly with fan nozzles
- Deep drawn tank construction with coved corners for hygiene compliance
- Electronic controls with digital temperature monitoring for wash and rinse zones
- Pressurised rinse system maintains consistent sanitising temperature
Suitable Operations
- Restaurants
- Hotels
- Catering businesses
- Food trucks
- Commercial kitchens
Procurement & Support
TurcoBazaar supplies Zodex commercial dishwashers from its UK facility to operations worldwide. Shipping is available to the UK, Europe, USA, Canada, Middle East, and Africa. The H60D requires freight shipping due to its 102 kg weight and hardwired 3-phase electrical specification.
Frequently Asked Questions
Q: Is the H60D suitable for continuous commercial operation?
A: Yes. The unit is built for fixed installation in commercial kitchens where warewashing runs continuously during service. The 3kW wash pump and 12kW rinse heater are rated for sustained use across multiple service periods per day.
Q: What electrical supply does this dishwasher require?
A: The H60D operates on 400V 3-phase power and requires hardwired installation by a qualified electrician. Total power draw is 15kW including wash pump and rinse heating element. Single-phase power is not compatible with this model.
Q: Does TurcoBazaar ship the H60D to North America and the Middle East?
A: Yes. Worldwide shipping is available to the USA, Canada, Middle East, Europe, Africa, and UK. Freight cost depends on destination and is quoted separately due to the 102 kg unit weight and dimensional packaging requirements.
Q: What after-sales support is available for the H60D?
A: TurcoBazaar provides technical documentation, spare parts supply for wear components, and guidance on maintenance schedules. Support covers wash pump servicing, heating element replacement, and troubleshooting electrical or water flow issues.
Q: Are spare parts available for the detergent and rinse pumps?
A: Yes. Replacement pumps, heating elements, wash arms, and electronic control components are stocked for the H60D. Lead time for spare parts delivery is typically 5-10 working days to UK addresses and 10-20 days for international shipping.