Commercial Pot Wash Sink Stainless steel 2 bowl 1410x600x900mm Round legs | TurcoBazaar YSA260141201

Commercial Pot Wash Sink Stainless steel 2 bowl 1410x600x900mm Round legs | TurcoBazaar YSA260141201
Commercial Pot Wash Sink Stainless steel 2 bowl 1410x600x900mm Round legs | TurcoBazaar YSA260141201
This offer ends in:
Days
Hours
Min
Sec
from Save -69%
£278.40
£896.40
Ex Tax: £278.40
  • Brand: Zodex
  • Model: YSA260141201
  • SKU: YSA260141201
Sold: 0
Views: 891
UK-Based Supplier
Worldwide Shipping
Technical Support
Spare Parts & After-Sales

The YSA260141201 is a two-bowl stainless steel pot wash sink supplied in flat-pack form for assembly on site. It measures 1410×600×900mm with round legs and provides dedicated washing capacity for cookware, utensils, and large kitchen equipment. Zodex manufactures this unit to meet CE hygiene and safety standards for commercial food service environments.

Commercial Application

Two-bowl configuration separates washing and rinsing operations in a single footprint. The 450mm-deep bowls accommodate stock pots, sheet pans, and mixing bowls that do not fit standard prep sinks. Each bowl measures 610mm wide, which allows side-by-side processing during high-volume service periods.

Placement near cooking stations reduces staff travel time during meal service. The 100mm upstand prevents water splash onto adjacent walls and equipment. Round legs with ABS feet allow minor height adjustment on uneven floors and protect floor surfaces from corrosion.

Key Operational Advantages

  • Two 610×450mm bowls provide 400mm depth for large cookware washing
  • 1410mm overall width fits standard 1500mm alcoves in commercial kitchens
  • 100mm rear upstand protects wall surfaces from water splash and detergent spray
  • Stainless steel construction meets food-safe surface requirements for direct equipment contact
  • Flat-pack delivery reduces freight costs and allows access through standard doorways
  • Round legs with ABS feet prevent floor corrosion in wet-area installations

Technical Specifications

SpecificationDetails
Model / SKUYSA260141201
CertificationMeets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements.

Construction & Build Quality

Zodex fabricates the unit from stainless steel sheet with welded seams at bowl junctions. The 89mm drain holes accept standard commercial waste fittings. ABS bullet feet attach to round legs and distribute load across floor surfaces.

  • Stainless steel throughout — worktop, bowls, legs, and upstand
  • Welded bowl construction eliminates leak points at seams
  • 89mm drain openings accept standard commercial basket strainers
  • ABS feet resist water absorption and chemical degradation

Suitable Operations

  • Commercial kitchens
  • Hotel prep areas
  • Restaurant kitchens
  • Catering production facilities
  • Food processing operations

Procurement & Support

TurcoBazaar supplies Zodex commercial sinks from UK warehousing to buyers in Europe, North America, the Middle East, and Africa. CE certification documentation ships with each unit for compliance records. Dispatch occurs within 1–3 working days for in-stock items.

Worldwide ShippingUK, Europe, USA, Canada, Middle East, Africa
📦
Freight QuotationAvailable for larger or heavy units
💬
WhatsApp SupportTechnical guidance before ordering
🔧
Spare PartsAfter-sales support available
Need help choosing the correct model?Contact TurcoBazaar for technical drawings, steel grade confirmation, or freight quotation for your delivery location. WhatsApp enquiries receive same-day response during UK business hours.
Contact Our Team

Frequently Asked Questions

Q: What grade of stainless steel does Zodex use in the YSA260141201?

A: Zodex typically uses 430-grade stainless steel for sink construction, which provides corrosion resistance in food service environments at lower cost than 304 grade. Confirm steel grade with TurcoBazaar before purchase if 304 specification is required for your operation.

Q: What is the maximum load capacity for the worktop surface?

A: The round leg design distributes static loads across four contact points. Zodex does not publish a specific worktop load rating, but the structure handles typical pot stacking and equipment placement during wash operations. Avoid concentrated point loads exceeding 50kg in a single location.

Q: Are the legs adjustable for uneven floor surfaces?

A: The ABS bullet feet provide minor leveling adjustment of approximately 10–15mm through threaded inserts. Floors with greater than 20mm variance across the sink footprint require shims or sub-frame leveling before installation.

Q: Can the 100mm upstand be removed or replaced with a taller splashback?

A: The upstand is welded to the rear worktop edge and cannot be removed without structural modification. Custom splashback heights are not available for this model. Buyers requiring taller splashbacks should contact TurcoBazaar for alternative Zodex models.

Q: Does Zodex offer custom sizing for the YSA260141201 configuration?

A: This model ships in fixed 1410×600×900mm dimensions. Custom sizing requires factory lead times of 6–10 weeks and minimum order quantities. Contact TurcoBazaar with required dimensions for feasibility and quotation.

Write a review

Note: HTML is not translated!
Rating
Bad Good

Important Information for Commercial Buyers

Worldwide Commercial Shipping

TurcoBazaar is a UK-based commercial kitchen equipment supplier serving the UK, Europe, the USA, Canada, and many international destinations. We regularly support restaurants, hotels, takeaways, food trucks, catering companies, cafés, and commercial kitchens with international equipment supply.

Professional Commercial Use

Our products are designed for professional foodservice and commercial kitchen environments. Depending on the model, equipment is suitable for restaurants, ghost kitchens, hotel kitchens, bakeries, takeaways, catering businesses, and mobile catering operations.

Gas and Electrical Options

Depending on the product, equipment may be available in LPG, Natural Gas, 110V, 220V, or 380V configurations. Available options can often be selected directly on the product page, or confirmed with our team before ordering.

Product Standards and Documentation

Many products are CE certified and manufactured for professional commercial use. For selected models, we may also be able to provide technical documentation to support local commercial checks where required.

After-Sales Support

TurcoBazaar provides professional after-sales support, technical guidance, and spare parts support for commercial customers worldwide. Our aim is to help businesses choose suitable equipment and keep it working reliably over the long term.

Need a Shipping Review?

If shipping costs appear high at checkout, contact our team directly. In many cases we can review the destination, product size, and freight options to see whether a more suitable shipping solution can be offered.