
Ask a Question About This Product
This offer ends in:
The NT1002 is a wall-mounted water cooler unit that chills mains-fed water to +8°C to +12°C at a throughput of 100 litres per hour. It delivers cold drinking water through two taps in facilities where floor space is limited. Built from stainless steel for hygiene compliance in commercial food environments.
Commercial Application
This unit suits workplaces where staff require continuous access to chilled water without occupying floor area. Mounting at wall height keeps the supply clear of storage zones and cleaning operations. The 100 L/hr output supports shift teams of 20–40 people during peak service hours.
The two-tap configuration allows simultaneous use during busy periods. The thermostat maintains water between +8°C and +12°C without manual adjustment. Stainless steel construction meets food-contact hygiene standards in front- and back-of-house operations.
Key Operational Advantages
- 100 litres per hour output at +8°C to +12°C
- Wall-mounted design saves 0.26 m² of floor space
- Two tap outlets for simultaneous access
- 450W compressor on 220–230V single-phase supply
- Stainless steel body complies with food hygiene codes
- CE certified for UK, EU, USA (NSF), and Canada (CSA) markets
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | NT1002 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
The unit is fabricated from stainless steel with a welded frame. Internal refrigeration uses a 450W compressor rated for continuous commercial duty. External surfaces are non-porous and wipe-clean. Tap assemblies are removable for descaling and maintenance.
- Stainless steel body and tap housing
- 450W commercial-grade refrigeration compressor
- Removable tap assemblies for descaling
- Welded frame construction for wall fixing
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the NT1002 from UK stock to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Unit ships on standard pallet. Freight quotation provided for international orders over 50 kg gross weight.
Frequently Asked Questions
Q: What grade of stainless steel is used in the NT1002 body?
A: Zodex does not publish the steel grade in standard documentation. TurcoBazaar can request confirmation from the manufacturer for procurement requiring 304 or 430 grade specification. Most commercial water coolers use 304 stainless for corrosion resistance.
Q: What is the maximum output if taps run continuously?
A: The unit chills 100 litres per hour at +8°C to +12°C under continuous draw. Recovery time after sustained use depends on ambient temperature and inlet water temperature. Output drops if ambient exceeds +30°C.
Q: Can the mounting height be adjusted after installation?
A: Mounting height is set during wall-fixing. The unit weighs approximately 35 kg when empty. Repositioning requires removal and new wall fixings. Standard installation height is 900–1100 mm from floor to tap centreline.
Q: Does the unit require a drain connection?
A: No drain is required for normal operation. The refrigeration system is sealed. If descaling is performed on-site, temporary drainage into a bucket is sufficient.
Q: What mains water pressure is required for correct operation?
A: The unit operates on standard mains pressure between 2 and 6 bar. Pressure below 2 bar reduces flow rate at the taps. Pressure above 6 bar may require an inline regulator.