
Ask a Question About This Product
This offer ends in:
The WTG750X1000 is a 1000×750 mm stainless steel work table with integrated bottom shelf. Top surface carries 295 kg. Bottom shelf holds 205 kg. Manufactured by Zodex for commercial food preparation environments.
Commercial Application
Kitchen managers deploy this table in prep zones where staff handle raw ingredients, portion proteins, or assemble plated dishes. The 750 mm depth provides sufficient reach-in access without occupying excessive floor space. Bottom shelf stores mixing bowls, utensil containers, or backup ingredient trays during service.
Chefs position the table at stations requiring constant wipe-down between tasks. The 430 stainless steel top resists corrosion from acidic marinades and frequent sanitiser contact. Galvanised undershelf and legs reduce material cost while maintaining structural load requirements.
Key Operational Advantages
- 1.2 mm 430 stainless steel work surface — non-porous, food-contact compliant
- 295 kg top shelf capacity — handles mixers, slicers, or stacked ingredient bins
- 205 kg bottom shelf load rating — stores backup stock during prep runs
- Galvanised steel frame and hat channel — structural rigidity at 25 kg total weight
- Flat-pack delivery — reduces freight cost, assembles with standard tools
- Adjustable plastic bullet feet — compensates for uneven kitchen floors
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WTG750X1000 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 25.0 kg (55.1 lbs) |
Construction & Build Quality
Top surface is 1.2 mm thick 430-grade stainless steel with square slant front edge to contain spills. Undershelf and hat channel are galvanised steel to reduce weight and cost. Legs and corner sockets use galvanised tubing. Plastic bullet feet adjust for floor irregularities.
- 430 stainless steel top — 1.2 mm gauge, square slant front edge
- Galvanised steel undershelf and reinforcement channel
- Galvanised tubular legs with corner socket connectors
- Height-adjustable plastic bullet feet
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies Zodex stainless steel work tables from UK warehousing. Freight consolidates with other Zodex units to reduce per-item shipping cost. Flat-pack format permits standard pallet shipment to the UK, Europe, USA, Canada, Middle East, and Africa.
Frequently Asked Questions
Q: Is the top surface 304 or 430 stainless steel?
A: The WTG750X1000 uses 1.2 mm thick 430 stainless steel for the work surface. It meets food-contact hygiene standards. 430 grade offers corrosion resistance at lower cost than 304.
Q: What is the maximum safe load for the top shelf?
A: Top shelf supports 295 kg evenly distributed. This accommodates bench mixers, slicers, or stacked ingredient containers. Concentrated point loads should not exceed manufacturer guidelines.
Q: Are the legs adjustable for uneven floors?
A: Plastic bullet feet thread into the base of each galvanised leg. Adjustment range compensates for minor floor irregularities common in older commercial kitchens.
Q: Can I add a splash-back to this model?
A: The WTG750X1000 ships without upstand or splash-back. Custom splash-backs are available on request for wall-mounted installations where water or ingredient spray requires containment.
Q: Is custom sizing available for tighter kitchen layouts?
A: TurcoBazaar coordinates custom-width or custom-depth orders through Zodex manufacturing. Lead time extends 4–6 weeks beyond standard flat-pack inventory. Minimum order quantities may apply.