Professional Work table Stainless steel Bottom shelf Upstand 700x600x850mm | TurcoBazaar VT76SLB

Q: What grade of stainless steel is used in the VT76SLB?

A: The unit uses 201 AISI stainless steel for all surfaces and structural components. This grade meets food contact hygiene requirements under CE, NSF, and CSA standards. The Scotch Brite finish provides non-porous cleanability for commercial food prep.

Q: What is the maximum load capacity of the work surface?

A: The reinforced double-walled worktop supports up to 500 kg distributed load. This allows placement of heavy mixers, slicers, or stacked ingredient containers. The bottom shelf carries additional weight for dry storage or equipment below the work surface.

Q: Are the legs adjustable for uneven floors?

A: Yes. Adjustable feet thread into the base of each 40×40 mm square leg. Height adjustment range is 830-870 mm from floor to work surface, excluding the 100 mm upstand. Plastic pads protect floor finishes and provide slip resistance.

Q: Can the upstand be removed or is it welded?

A: The 100 mm upstand is integral to the VT76SLB model specification. It is welded to the rear edge of the worktop. For tables without upstand, specify alternative model codes when ordering.

Q: Is custom sizing available for non-standard dimensions?

A: Standard production includes the 700×600 mm footprint as specified. Custom sizing requires factory enquiry with lead time and minimum order quantities. Contact TurcoBazaar with dimensional requirements for feasibility and pricing.