





Ask a Question About This Product
This offer ends in:
- Model: HS12
- SKU: HS12
The HS12 is a wall-mounted hand sink for staff hygiene compliance in commercial kitchens and food prep areas. Bowl measures 229×229×102 mm with 203 mm integrated splashback. Constructed from 0.8 mm 304 stainless steel with 1.0 mm wall-mounted brackets.
Commercial Application
Wall-mounted design frees floor space in tight prep areas and dish zones. Positioned at handwashing stations near cooking lines, prep tables, or walk-in entries where hygiene regulations require dedicated hand wash facilities separate from food contact sinks.
Used throughout service for staff handwashing between tasks. Compact footprint suits confined spaces where floor-standing units cannot fit. Supplied with 1.5-inch drain basket; gooseneck faucet sold separately.
Key Operational Advantages
- 0.8 mm 304 stainless steel bowl: 229×229×102 mm interior dimensions
- 203 mm rear splashback prevents wall water damage
- Wall-mounted bracket system (1.0 mm 304 stainless steel) eliminates floor obstruction
- Total installed footprint: 305 mm width × 406 mm depth × 356 mm height
- 3 kg unit weight simplifies installation on standard commercial wall structures
- 1.5-inch drain basket included; compatible with standard UK waste fittings
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | HS12 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 3.0 kg (6.6 lbs) |
Construction & Build Quality
Bowl fabricated from 0.8 mm thick 304 grade stainless steel. Wall brackets use 1.0 mm 304 stainless steel with bolt-through mounting. Integrated splashback welded to bowl perimeter to form single-piece assembly.
- 304 stainless steel resists corrosion in wet commercial environments
- Single-piece bowl and splashback construction eliminates seam leakage points
- Wall bracket system rated for typical commercial installation on masonry or stud walls
- Drain opening accepts standard 1.5-inch UK waste fittings
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the HS12 from UK stock to commercial buyers in the United Kingdom, European Union, United States, Canada, Middle East, and Africa. Unit ships complete with mounting hardware and drain basket. Gooseneck faucet selected separately based on local plumbing standards.
Frequently Asked Questions
Q: Is the bowl 304 or 430 grade stainless steel?
A: Bowl constructed from 0.8 mm 304 grade stainless steel. Wall brackets also 304 grade at 1.0 mm thickness. 304 grade offers superior corrosion resistance in wet commercial environments compared to 430 grade.
Q: What faucet fitting does the unit accept?
A: Unit ships without faucet. Rear deck pre-drilled for standard gooseneck faucet with UK or EU thread. Faucet sold separately to match local plumbing code and water supply type.
Q: What wall structure is required for mounting?
A: Wall brackets designed for masonry, concrete block, or timber stud walls with appropriate fixings. 3 kg unit weight plus water load requires secure anchor into structural material. Consult local building codes for wet area mounting requirements.
Q: Does the splashback extend around sides or rear only?
A: 203 mm splashback located at rear of bowl only. Side walls open for wall-mounted installation. Rear splashback protects wall surface from water splash during handwashing.
Q: What waste pipe diameter does the drain accept?
A: 1.5-inch drain basket included. Accepts standard UK 1.5-inch waste pipe or trap connection. Basket removable for cleaning and debris removal.