









Ask a Question About This Product
- Model: WHWS30100
- SKU: WHWS30100
WHWS30100 is a wall-mounted stainless steel shelf measuring 1000×300×250mm. It provides hygienic storage for pots, pans, containers and utensils in commercial kitchens. Load capacity rated to 50 kg.
Commercial Application
Wall-mounted shelving removes floor clutter and positions frequently used items at working height. Equipment remains accessible during high-volume service without obstructing floor traffic or cleaning operations.
Kitchens use this unit above prep stations or near cooking lines to store sauté pans, stockpots, mixing bowls and utensils. The 300mm depth accommodates standard commercial cookware without protruding into walkways.
Key Operational Advantages
- 50 kg load capacity for heavy cookware and containers
- 1000mm width fits standard wall sections between equipment
- 300mm depth holds commercial pots and pans without overhang
- 250mm height provides clearance for stacked containers
- Fastens directly to wall studs without rail systems
- Stainless steel construction resists corrosion in wet environments
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | WHWS30100 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
Unit fabricated from stainless steel sheet with welded joints. Non-porous surface meets food-contact hygiene requirements. Wall mounting eliminates floor contact points that collect debris.
- Stainless steel sheet construction throughout
- Welded joints at all connection points
- Direct wall-mount brackets included
- Non-porous food-safe surface finish
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this unit from UK stock to commercial buyers in Europe, North America, Middle East and Africa. CE certification documented for UK and EU installations. NSF and CSA equivalence confirmed for North American projects.
Frequently Asked Questions
Q: What grade of stainless steel is used in the WHWS30100?
A: Standard production uses Type 304 stainless steel for corrosion resistance in wet kitchen environments. Type 430 available on request for dry storage applications at reduced cost.
Q: How is the 50 kg load capacity distributed across the shelf?
A: Load rating assumes uniform distribution across the full 1000mm length with proper wall-stud mounting. Concentrated loads should not exceed 25 kg at any single point.
Q: Can the shelf height be adjusted after installation?
A: No. Wall bracket positions are fixed during installation. Height must be determined before drilling mounting holes.
Q: Is a splash-back panel available for this model?
A: Splash-back not included in standard specification. Custom rear panel can be fabricated if required for specific hygiene or equipment protection needs.
Q: Can TurcoBazaar supply custom widths or depths?
A: Yes. Custom dimensions quoted on request. Minimum order quantities apply for non-standard sizing.