



Ask a Question About This Product
The DAMPAK 22TBF0S-70.4C is a four-drawer undercounter refrigerator with 108 litres total capacity, maintaining +2°C to +8°C storage temperature. Stainless steel construction provides commercial-grade durability in hotel prep areas, restaurant kitchens, and catering facilities. Footprint of 150 cm width × 70 cm depth × 85 cm height fits standard undercounter layouts.
Commercial Application
Four separate drawer compartments allow ingredient segregation at service stations without opening a single large door. Chefs access prepped mise en place or portioned proteins during service without temperature loss across all stored items. The 70 cm depth matches standard counter depths.
Each drawer operates independently for front-of-house bar stations, pastry prep lines, or hot kitchen cold storage. The 108-litre total capacity distributes across four zones for different temperature-sensitive ingredients. Undercounter placement keeps refrigerated stock within arm's reach during high-volume service.
Key Operational Advantages
- 108 litres across four independent drawer compartments
- Maintains +2°C to +8°C across all zones
- 240V single-phase operation on standard UK commercial circuits
- 150 cm width × 70 cm depth fits undercounter workstation layouts
- Stainless steel interior and exterior for hygiene compliance
- 125 kg weight indicates commercial-grade insulation and compressor
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | 22TBF0S-70.4C |
| Dimensions (W × D × H) | 15 × 7 × 8 cm (5.9 × 2.8 × 3.3 in) |
| Voltage | 240v |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 125.0 kg (275.6 lbs) |
Construction & Build Quality
Stainless steel exterior and interior surfaces meet commercial kitchen hygiene standards. The 125 kg total weight reflects insulation thickness and compressor robustness required for continuous operation. CE certification confirms compliance with UK and EU commercial refrigeration safety requirements.
- Stainless steel drawer fronts and body shell
- Commercial-grade compressor for 24/7 operation
- Insulated drawer compartments maintain independent temperatures
- Adjustable feet compensate for uneven floor surfaces
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the DAMPAK 22TBF0S-70.4C from UK inventory to commercial buyers across Europe, North America, the Middle East, and Africa. The 125 kg unit weight requires freight shipping with tailgate delivery or loading dock access. Lead time typically runs 2–4 weeks for international orders.
Frequently Asked Questions
Q: What stainless steel grade is used on exterior and drawers?
A: DAMPAK typically uses 304-grade stainless steel on commercial refrigerator exteriors for corrosion resistance. Interior surfaces use food-safe 304 or 430 grade depending on compartment function. Confirm grade specification with technical team before purchase.
Q: Can each drawer maintain different temperature zones?
A: No, the +2°C to +8°C temperature range applies across all four drawers from a single compressor. All compartments operate at the same thermostat setting. Independent temperature zones require separate refrigeration units.
Q: What is maximum load capacity per drawer?
A: Each drawer typically supports 20–25 kg of stored product depending on shelf configuration. Total 108-litre capacity distributes approximately 27 litres per drawer. Consult installation manual for exact weight limits on fully extended drawer rails.
Q: Does the unit require dedicated ventilation clearance?
A: Yes, compressor-based refrigeration requires minimum 10 cm clearance on sides and rear for airflow. Front ventilation grilles must remain unobstructed. Installation in enclosed cabinets requires additional exhaust ventilation to prevent overheating.
Q: Are replacement drawer seals available from UK stock?
A: TurcoBazaar holds common wear parts including drawer gaskets, thermostat assemblies, and compressor relay switches. Lead time for seals typically runs 3–5 business days within UK. International spare part shipments coordinate with regional freight partners.