



Ask a Question About This Product
The 22TBF3S-70 is a 455-litre undercounter refrigeration unit with three door compartments. It maintains +2°C to +8°C operating temperature for prep ingredient storage in commercial kitchens. The 200 cm width and 85 cm working height allow direct integration beneath standard counter installations.
Commercial Application
This unit stores prepared ingredients, pre-portioned proteins, dairy products, and vegetable mise en place at chef-accessible height. Three independent door sections reduce cold air loss during service periods. The counter-height design eliminates repeated bending during high-volume prep and plating.
Kitchen staff access chilled ingredients without leaving the work line during service. The 455-litre total capacity supports daily ingredient volumes for mid-sized restaurants or hotel breakfast service operations. Temperature stability between +2°C and +8°C meets HACCP compliance requirements for cold chain management.
Key Operational Advantages
- 455-litre capacity across three independently accessed compartments
- Operates on 220/240V at 400 watts with 50-60 Hz compatibility
- Temperature range +2°C to +8°C for general cold storage
- 50mm CFC-free polyurethane insulation at 37/45 kg/m³ density
- AISI 430 stainless steel construction with AISI 304 upgrade option
- 200 × 70 × 85 cm footprint fits standard undercounter installations
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | 22TBF3S-70 |
| Dimensions (W × D × H) | 20 × 7 × 8 cm (7.9 × 2.8 × 3.3 in) |
| Voltage | 220/240V |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 137.0 kg (302.0 lbs) |
Construction & Build Quality
The cabinet uses AISI 430 stainless steel for exterior and interior surfaces with an AISI 304 specification available for corrosive or marine environments. Polyurethane foam insulation at 50mm thickness and 37/45 kg/m³ density provides thermal retention. The refrigeration system runs on R404A or R290 refrigerant with replaceable compressor access.
- AISI 430 stainless steel standard, AISI 304 option for coastal or chemical exposure
- 50mm polyurethane insulation rated for commercial thermal efficiency
- Three self-closing doors with magnetic gasket seals
- Adjustable stainless steel legs for uneven floor compensation
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies DAMPAK commercial refrigeration units to UK domestic and international commercial buyers. Shipping routes cover Europe, North America, Middle East, and African markets with freight forwarding arranged for 137 kg units. CE certification meets UK and EU compliance standards; NSF and CSA equivalency applies for North American installations.
Frequently Asked Questions
Q: Is this unit AISI 304 or AISI 430 stainless steel?
A: Standard specification is AISI 430 stainless steel. AISI 304 is available at additional cost for installations requiring higher corrosion resistance or marine environment durability.
Q: What is the shelf load capacity per compartment?
A: Each compartment includes two adjustable shelves rated for 25 kg distributed load. Shelves are removable for storage of taller containers or bulk ingredient bins.
Q: Can the door swing direction be reversed on site?
A: Door hinges are field-reversible using standard tools. Hinge pin removal and gasket repositioning take approximately 15 minutes per door.
Q: What ventilation clearance is required for the compressor?
A: Rear-mounted compressor requires 10 cm clearance from walls for air circulation. Side clearances of 5 cm prevent heat buildup during continuous operation.
Q: Does this fridge operate on North American 110V electrical systems?
A: This model requires 220/240V at 50-60 Hz. A step-up transformer is necessary for 110V regions. Confirm local voltage before ordering to avoid electrical incompatibility.
