



Ask a Question About This Product
The DAMPAK 22DBF1S-GN is a 700-litre single-door upright refrigerator built for commercial food storage in medium-volume operations. It holds chilled stock at 0–5°C in a stainless steel cabinet measuring 8×7×21 cm. Used in hotel kitchens, restaurant prep areas, and catering facilities where walk-in coolers are not practical.
Commercial Application
This unit consolidates bulk chilled inventory in a footprint smaller than multi-door reach-ins. It replaces under-counter fridges in operations needing centralised access to prepped ingredients, dairy, and portioned proteins. The single door reduces cold loss during service rush.
Operators load the cabinet overnight with prep for the following day's service. The 700-litre capacity supports 60–80 covers in table service or 120–150 plated meals in banquet workflow. Temperature recovery after door opening is a key performance metric during high-frequency access periods.
Key Operational Advantages
- 700-litre gross capacity in single-door upright format
- Stainless steel exterior and interior for corrosion resistance and cleanability
- 0–5°C temperature range with digital thermostat control
- GN 2/1 grid compatibility for standard gastronorm storage
- Self-closing door with magnetic gasket seal
- Adjustable stainless steel shelving with load rating per shelf
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | 22DBF1S-GN |
| Dimensions (W × D × H) | 82.0 × 69.0 × 210.0 cm (32.3 × 27.2 × 82.7 in) |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
Construction & Build Quality
Cabinet shell and door are 430-grade stainless steel. Interior liner is 304-grade stainless steel with coved corners for drainage and cleaning. Compressor housing is powder-coated steel with ventilation grilles. Adjustable legs are stainless steel with thread-lock nuts.
- 430 stainless steel exterior with brushed finish
- 304 stainless steel interior with coved corners
- Polyurethane foam insulation injected under pressure
- Hermetically sealed compressor with R290 refrigerant
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies the DAMPAK 22DBF1S-GN from its UK warehouse to buyers in the United Kingdom, Europe, North America, the Middle East, and Africa. All units ship with CE certification documentation. Freight quotations for pallet delivery are provided on request for multi-unit orders or remote locations.
Frequently Asked Questions
Q: What grade of stainless steel is used in the 22DBF1S-GN cabinet?
A: Exterior panels are 430-grade stainless steel. Interior liner and shelves are 304-grade stainless steel for direct food contact compliance. Both grades meet NSF and EU hygiene standards.
Q: What is the maximum load capacity per shelf?
A: Each adjustable shelf supports 40 kg evenly distributed. The unit ships with four shelves as standard. Additional shelves are available as optional accessories with the same load rating.
Q: Are the legs adjustable for uneven floor surfaces?
A: Yes. Four stainless steel legs adjust from 100 mm to 150 mm height. Thread-lock nuts prevent drift under load. Adjustment compensates for floor slopes up to 15 mm across the cabinet footprint.
Q: Can a splash-back panel be fitted to the rear of the cabinet?
A: The 22DBF1S-GN does not include a splash-back as standard. Custom splash-backs in 430 stainless steel can be fabricated by the buyer or specified at order time for factory installation. Height and width must be confirmed before fabrication.
Q: Is custom sizing available for this model?
A: The 22DBF1S-GN is a standard production unit with fixed external dimensions. DAMPAK offers custom sizing on OEM orders with minimum quantities of 10 units. Lead time for custom builds is 8–12 weeks from deposit.