
Ask a Question About This Product
This offer ends in:
This 1/2 GN flat grill rack measures 255 × 192 × 15 mm and provides elevated cooking and cooling surfaces in commercial kitchens. The grid construction allows convection heat circulation during grilling, roasting, or cooling operations. Used in hotel kitchens, restaurant prep areas, and catering production facilities.
Commercial Application
The rack fits standard half-size gastronorm trays and baking pans. It elevates food above drip trays during cooking, allowing fat and moisture to drain while maintaining airflow around the product. This prevents soggy bottoms on roasted vegetables, grilled proteins, and baked goods.
During high-volume service, multiple racks stack to cool baked items or hold grilled components before plating. The 15 mm height provides clearance for drainage without occupying excessive vertical space in heated holding cabinets or speed racks. Staff can transfer racks directly from oven to cooling station.
Key Operational Advantages
- 304 stainless steel construction meets CE, NSF, and CSA food contact standards
- Grid spacing promotes even heat distribution during cooking and accelerated cooling after service
- 0.17 kg weight allows single-hand operation during high-volume prep
- 255 × 192 mm footprint fits standard 1/2 GN pans and commercial oven shelves
- 15 mm elevation provides clearance for grease drainage and airflow
- Welded construction maintains structural integrity under repeated thermal cycling
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | JJD6604 |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 0.17 kg (0.4 lbs) |
Construction & Build Quality
The rack uses 304-grade stainless steel throughout. Wire grid is welded at intersections to prevent separation under load. Material resists corrosion from acidic marinades and high-temperature cooking environments.
- 304 stainless steel maintains hygiene certification across repeated wash cycles
- Welded grid joints eliminate movement under 5 kg distributed load
- Material thickness withstands thermal shock from oven-to-cooler transfers
- Wire spacing allows standard kitchen brushes to reach all surfaces during cleaning
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this Zodex-manufactured rack from UK warehouse stock to commercial buyers in the UK, Europe, USA, Canada, Middle East, and Africa. Volume orders ship via freight consolidation for reduced per-unit transport cost. Single units ship within three business days to UK mainland addresses.
Frequently Asked Questions
Q: Is this 304 or 430 grade stainless steel?
A: The JJD6604 uses 304-grade stainless steel. This grade provides superior corrosion resistance in commercial kitchens compared to 430 grade. Material certification documents are available for health inspections.
Q: What load capacity does the rack support?
A: The welded grid structure supports up to 5 kg distributed load without deformation. This accommodates full trays of chicken portions, vegetable batches, or stacked baked goods. Concentrated point loads may cause localised bending.
Q: Can I stack multiple racks during cooling?
A: Yes, the 15 mm height allows vertical stacking with clearance between layers. Most operations stack three to four racks in standard speed racks. Ensure adequate airflow space remains between loaded trays.
Q: Does the rack fit standard gastronorm pans?
A: The 255 × 192 mm footprint matches 1/2 GN pan dimensions. It fits inside standard half-size pans or sits on commercial oven shelves designed for GN sizing. Verify your equipment accepts 1/2 GN formats before ordering.
Q: Is custom sizing available for non-standard equipment?
A: Custom dimensions require factory production runs with minimum order quantities. TurcoBazaar coordinates bespoke sizing through Zodex for institutional buyers with specific dimensional requirements. Lead time extends to 8-12 weeks for custom manufacturing.