



Ask a Question About This Product
The TURCO 22TBF2S-60 is a 235-litre double-door undercounter refrigerator with stainless steel construction. Measures 150 cm wide, providing refrigerated storage beneath a flat worktop surface. Operates on 220/240V for commercial kitchen use in restaurants, cafés, prep kitchens, and catering operations.
Commercial Application
Fits beneath standard counter height to combine cold storage with workspace. Stores pre-portioned ingredients, dairy, prepared salads, sandwich fillings, and packaged goods at arm's reach during service. Stainless top surface functions as additional prep area where floor space is limited.
Two-door configuration allows separation of raw and prepared items or ingredient grouping by station. 235-litre capacity holds roughly 40–50 full-size gastronorm pans depending on depth. Used during prep shift for batch ingredient storage and during service for line restocking.
Key Operational Advantages
- 235-litre total capacity across two separate compartments
- 150 cm width provides extended worktop surface and increased storage density
- Stainless steel exterior and top — wipe-clean, chemical-resistant, food-contact safe
- 90 kg weight indicates reinforced cabinet structure for high-traffic environments
- CE certified construction meets UK, EU, USA (NSF), and Canada (CSA) commercial standards
- 220/240V operation suits UK mains supply without modification
Technical Specifications
| Specification | Details |
|---|---|
| Model / SKU | 22TBF2S-60 |
| Dimensions (W × D × H) | 150.0 × 60.0 × 85.0 cm (59.1 × 23.6 × 33.5 in) |
| Voltage | 220/240V |
| Certification | Meets commercial kitchen hygiene and safety standards applicable to CE (UK & EU), NSF (USA) and CSA (Canada) requirements. |
| Weight | 90.0 kg (198.4 lbs) |
Construction & Build Quality
Cabinet and doors constructed from stainless steel for corrosion resistance and hygiene compliance. Reinforced door hinges and magnetic gaskets maintain seal integrity under repeated access. Internal shelving adjustable to accommodate varied container heights.
- Stainless steel body and worktop — non-porous, food-safe surface
- Magnetic door seals with corrosion-resistant hinges rated for commercial cycle frequency
- Adjustable feet compensate for uneven flooring and provide cleanable underspace
- Internal shelving adjustable in height to suit gastronorm pan stacking
Suitable Operations
- Commercial kitchens
- Hotel prep areas
- Restaurant kitchens
- Catering production facilities
- Food processing operations
Procurement & Support
TurcoBazaar supplies this unit from UK stock with shipping to Europe, USA, Canada, Middle East, and Africa. Manufactured by DAMPAK in Turkey under commercial kitchen equipment certification. Freight quotation provided for international orders based on destination and quantity.
Frequently Asked Questions
Q: What grade of stainless steel is used in construction?
A: Cabinet and worktop constructed from food-grade stainless steel (typically 430 or 304 depending on panel). Interior shelving uses 304-grade for higher corrosion resistance in moisture environments. Confirm grade specification with technical team if required for specific hygiene audits.
Q: What is the load-bearing capacity of the worktop surface?
A: Worktop rated for distributed loads typical of food prep operations — cutting boards, mixing bowls, small appliances. Avoid concentrated point loads exceeding 25 kg in single location. 90 kg unit weight indicates reinforced frame suitable for sustained work surface use.
Q: Are the internal shelves adjustable in height?
A: Yes. Shelves mount on adjustable runners allowing vertical repositioning to accommodate tall containers or stacked gastronorm pans. Typically 3–4 height positions available per compartment. Remove shelves entirely for bulk item storage if required.
Q: Does the unit include adjustable legs for uneven floors?
A: Yes. Four adjustable feet allow leveling on uneven kitchen floors and provide clearance for underfloor cleaning. Typical adjustment range 50–80 mm. Legs threaded for tool-free height modification during installation.
Q: Can a splashback be fitted to the rear of the worktop?
A: Unit supplied without integrated splashback. Aftermarket stainless steel splashback panels can be wall-mounted or mechanically fastened to rear edge if required by local health code. Contact for custom fabrication or recommended third-party suppliers.
